Missing Exhaust Bracket Mystery, G-Series 6 Cyl.

[mnherb]

I was originally going to title this post "what am I missing?" but I think somebody would have answered "you are missing the engine...duh!"

What I am really asking is: What the heck does the missing exhaust support bracket (that attaches the welded tab on the exhaust pipe to the frame) actually look like? .... so that I know exactly what I am looking for.

The application is a 1941 6-Cylinder G-Series exhaust for a 1/2 - ton panel truck.

I did a bunch of research, and came up with a possible part number of 1GA 5274, Support, Muffler Inlet Pipe to Frame. But really not sure.

Any and all help is most appreciated!

Mike

[Newc]

Looks close to bellhousing/starter area. A fully restored 41 pu is in the Salem area, but lost location now. Newc

[petehoovie]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by mnherb

I was originally going to title this post "what am I missing?" but I think somebody would have answered "you are missing the engine...duh!"

What I am really asking is: What the heck does the missing exhaust support bracket (that attaches the welded tab on the exhaust pipe to the frame) actually look like? .... so that I know exactly what I am looking for.

The application is a 1941 6-Cylinder G-Series exhaust for a 1/2 - ton panel truck.

I did a bunch of research, and came up with a possible part number of 1GA 5274, Support, Muffler Inlet Pipe to Frame. But really not sure.

Any and all help is most appreciated!

Mike