The Ford Barn

Ken Arms · 03-08-2025, 08:42 PM

So, can someone tell me the correct orientation of the light switch when all lights are off. Vertical or horizontal ? Thankyou Ken

rockfla · 03-08-2025, 09:08 PM

6 &12. Or Verticle

petehoovie · 03-08-2025, 09:36 PM

Quote:

Originally Posted by Ken Arms

So, can someone tell me the correct orientation of the light switch when all lights are off. Vertical or horizontal ? Thankyou Ken

OFF

koates · 03-09-2025, 12:53 AM

Ken, do you not have a 34 Ford drivers handbook which shows all this kind of information ? One came with every new car. Regards, Kevin.

Ken Arms · 03-09-2025, 10:26 AM

Thanks to all. I had the horn rod out to clean intermittent horn issue and turns out you can assemble it either way.

Ken Arms · 03-12-2025, 12:35 PM

Sponsored Links (Register now to hide all advertisements)

By the way, if your horn intermittently fails to honk or not at all and your sure the horn and wiring is ok then you may want to clean the contact at the button on your wheel. That was the fix for mine. There are four tabs at the back side of the light/horn button assembly that have to be bent straight to get in there for cleaning. Ken

03-08-2025, 08:42 PM	#1
Ken Arms Senior Member Join Date: May 2010 Location: Essex Vermont Posts: 609	34 horn and light switch So, can someone tell me the correct orientation of the light switch when all lights are off. Vertical or horizontal ? Thankyou Ken

03-08-2025, 09:08 PM	#2
rockfla Senior Member Join Date: Mar 2014 Location: Jacksonville FL Posts: 4,806	Re: 34 horn and light switch 6 &12. Or Verticle

03-09-2025, 12:53 AM	#4
koates Senior Member Join Date: May 2010 Location: Melbourne Australia. Posts: 2,185	Re: 34 horn and light switch Ken, do you not have a 34 Ford drivers handbook which shows all this kind of information ? One came with every new car. Regards, Kevin.

03-09-2025, 10:26 AM	#5
Ken Arms Senior Member Join Date: May 2010 Location: Essex Vermont Posts: 609	Re: 34 horn and light switch Thanks to all. I had the horn rod out to clean intermittent horn issue and turns out you can assemble it either way.

03-12-2025, 12:35 PM	#6
Ken Arms Senior Member Join Date: May 2010 Location: Essex Vermont Posts: 609	Re: 34 horn and light switch Sponsored Links (Register now to hide all advertisements) By the way, if your horn intermittently fails to honk or not at all and your sure the horn and wiring is ok then you may want to clean the contact at the button on your wheel. That was the fix for mine. There are four tabs at the back side of the light/horn button assembly that have to be bent straight to get in there for cleaning. Ken