![]() |
#1 |
Senior Member
Join Date: Dec 2014
Location: NW WI
Posts: 104
|
![]()
I recently purchased a 1951 F1, I'm having difficulty reading the vin on the frame, I see it but parts of it are very hard to read, I know its correct because the part I can read matchs the glove box plate,
The title is wrong, I'm in the process of getting that corrected Any help to make it easier to read, I've been using a steel brush..... |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: May 2010
Location: imperial,mo
Posts: 701
|
![]()
Hello, try using a thin piece of paper and a pencil laid nearly flat and you should be able to highlight the characters.
Tom |
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: Dec 2014
Location: NW WI
Posts: 104
|
![]()
Thanks ..... I'll give that a try....
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Jul 2011
Location: SF Bay Area
Posts: 6,685
|
![]()
The use of a wire brush was perhaps the worst choice you could have made to reveal the serial number. You’re not dealing with tool steel, iron is soft and vulnerable to all abrasives.
__________________
Alan |
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 11,044
|
![]()
Read this VIN number revival info:
https://www.jalopyjournal.com/forum/...learer.621440/ |
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: May 2010
Posts: 2,532
|
![]() Sponsored Links (Register now to hide all advertisements)
|
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: May 2010
Location: Solihull, England.
Posts: 8,800
|
![]()
Sometimes useful to hold a light at a very low angle to cast a shadow across the digits. Also use the camera in your phone to video the area from all angles and use macro mode. Then watch it on a computer screen to identify the digits. Mart.
|
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|