The Ford Barn

whatdoyouwant · 10-07-2023, 08:47 AM

Anyone know where to obtain the rear brake line junction block for my Falcon?It is a tee that mounts on the rear axel vent bolt.

KULTULZ · 10-07-2023, 09:49 AM

The FORD PN is C4DZ 2074-A and fits the 1964/65 FALCON. If you can't find it NOS or TAKE-OFF, you may have to go with a universal fitting -

https://www.brakeconnect.com/product...e-line-joiners

https://www.inlinetube.com/collectio...rass|Standard|

whatdoyouwant · 10-07-2023, 11:02 AM

Thanks for the PN. I searched with no luck. I guess I will go with a universal. I must remember it takes 3/16 line. thanks al

paul2748 · 10-07-2023, 07:02 PM

I have one from a 64 Fairlane - is it the same thing ?

Lanny · 10-07-2023, 07:39 PM

Hey whatdoyouwant, I have a NEW universal brass 3/16 brake line "T".
Just snapped a quick picture of it. Has 3 threaded orfices and a mounting tab.
$8 Total mailed to your door. Just let me know...thx

Click on pic to Enlarge

whatdoyouwant · 10-08-2023, 09:00 AM

Sponsored Links (Register now to hide all advertisements)

Thanks, I have a new tee but I was hoping to find the right fitting so I would not need to bend the lines to connect.

al

10-07-2023, 08:47 AM	#1
whatdoyouwant Senior Member Join Date: Jan 2022 Posts: 167	1964 falcon Anyone know where to obtain the rear brake line junction block for my Falcon?It is a tee that mounts on the rear axel vent bolt.

10-07-2023, 09:49 AM	#2
KULTULZ Senior Member Join Date: Aug 2012 Location: IN A GALAXIE FAR, FAR AWAY Posts: 7,386	Re: 1964 falcon The FORD PN is C4DZ 2074-A and fits the 1964/65 FALCON. If you can't find it NOS or TAKE-OFF, you may have to go with a universal fitting - https://www.brakeconnect.com/product...e-line-joiners https://www.inlinetube.com/collectio...rass\|Standard\| __________________ ***** "Last Sunday, I caught him makin' eyes at Idell Bushey durin' preachin'. And I know what they do up there in the hills when they say they're possum huntin'. They're just sittin' around the campfire, drinkin' hard cider, hittin' each other on the shoulder and hollerin' 'flinch!'." ― Charlene Darling (Daughter of Briscoe Darling) Last edited by KULTULZ; 10-07-2023 at 10:18 AM.

10-07-2023, 11:02 AM	#3
whatdoyouwant Senior Member Join Date: Jan 2022 Posts: 167	Re: 1964 falcon Thanks for the PN. I searched with no luck. I guess I will go with a universal. I must remember it takes 3/16 line. thanks al

10-08-2023, 09:00 AM	#6
whatdoyouwant Senior Member Join Date: Jan 2022 Posts: 167	Re: 1964 falcon Sponsored Links (Register now to hide all advertisements) Thanks, I have a new tee but I was hoping to find the right fitting so I would not need to bend the lines to connect. al