The Ford Barn

flat head guy · 08-20-2023, 12:07 PM

I want to drop my 53 merc engine into my 48 ford and keep stock running gear.
does anyone know what flywheel I have to use in order to hook up to stock clutch, pressure plate, etc. I have the bell housing adapter to connect the transmission bell. hope someone has done this before and help me.
Thanks

Charlie Stephens · 08-20-2023, 12:45 PM

Sponsored Links (Register now to hide all advertisements)

Welcome new member. If you post in the V8 forum, https://www.fordbarn.com/forum/forumdisplay.php?f=4
you will get a better answer. Also you should add you general location to your profile.

Charlie Stephens

08-20-2023, 12:07 PM	#1
flat head guy Junior Member Join Date: May 2023 Posts: 4	engine swap I want to drop my 53 merc engine into my 48 ford and keep stock running gear. does anyone know what flywheel I have to use in order to hook up to stock clutch, pressure plate, etc. I have the bell housing adapter to connect the transmission bell. hope someone has done this before and help me. Thanks

08-20-2023, 12:45 PM	#2
Charlie Stephens Senior Member Join Date: May 2010 Location: Southern California Posts: 7,305	Re: engine swap Sponsored Links (Register now to hide all advertisements) Welcome new member. If you post in the V8 forum, https://www.fordbarn.com/forum/forumdisplay.php?f=4 you will get a better answer. Also you should add you general location to your profile. Charlie Stephens