The Ford Barn

BillCNC · 07-19-2022, 12:20 PM

Hey All,

I was wondering how one would lift an engine WITHOUT using an intake plate?

I see people using intake lift plates but then I see all these built up motors on stands all decked out. I can't imagine having to stripping an engine down to just to pick it up with the price of a gasket set being what they are.

Regards
Bill

51504bat · 07-19-2022, 12:33 PM

I use head bolts to attach the chain sling to. In a pinch I've also wrapped a strap around the exhaust manifolds but I've been told (and agree) that its not a good idea since manifolds are prone to breaking. That said when I pulled the 302 and with the AOD trans still attached out of an '83 van I bought for the engine and trans I used a carb lifting plate. No issues.

marko39 · 07-19-2022, 12:44 PM

You can use a chain run though two intake bolts. Just use longer bolts and use one in front and one in back. I do remove carb so I can keep the chain shorter.

Bored&Stroked · 07-19-2022, 01:01 PM

I use chains and/or a lift bar and chains. I have a short piece of chain on each end of the intake that picks up two long 3/8 NC bolts (Grade 8) - say 10" in length. With these two pieces attached at each end (4 bolts total), then I have a piece of chain between them that uses those U-connectors to connect into the ends.

Another good way is to use an engine lift bar (designed to move the weight forward or backwards) - and connect its two ends to the short pieces of chain - with like 8" pieces coming down from the bar.

tubman · 07-19-2022, 01:02 PM

Sponsored Links (Register now to hide all advertisements)

I made a set of metal tabs that will fit under the head bolts, even with finned heads. I use carabiners to attach the chain to these tabs.

07-19-2022, 12:20 PM	#1
BillCNC Senior Member Join Date: Aug 2017 Location: SoCal Desert Posts: 842	Engine Lifting Question Hey All, I was wondering how one would lift an engine WITHOUT using an intake plate? I see people using intake lift plates but then I see all these built up motors on stands all decked out. I can't imagine having to stripping an engine down to just to pick it up with the price of a gasket set being what they are. Regards Bill

07-19-2022, 12:33 PM	#2
51504bat Senior Member Join Date: Sep 2013 Location: SoCal-Redlands Posts: 3,413	Re: Engine Lifting Question I use head bolts to attach the chain sling to. In a pinch I've also wrapped a strap around the exhaust manifolds but I've been told (and agree) that its not a good idea since manifolds are prone to breaking. That said when I pulled the 302 and with the AOD trans still attached out of an '83 van I bought for the engine and trans I used a carb lifting plate. No issues. __________________ Making the simple complicated for over 30 years.

07-19-2022, 12:44 PM	#3
marko39 Senior Member Join Date: Oct 2016 Location: harpursville ny Posts: 1,114	Re: Engine Lifting Question You can use a chain run though two intake bolts. Just use longer bolts and use one in front and one in back. I do remove carb so I can keep the chain shorter.

07-19-2022, 01:01 PM	#4
Bored&Stroked Senior Member Join Date: Jan 2011 Location: Central Ohio Posts: 5,723	Re: Engine Lifting Question I use chains and/or a lift bar and chains. I have a short piece of chain on each end of the intake that picks up two long 3/8 NC bolts (Grade 8) - say 10" in length. With these two pieces attached at each end (4 bolts total), then I have a piece of chain between them that uses those U-connectors to connect into the ends. Another good way is to use an engine lift bar (designed to move the weight forward or backwards) - and connect its two ends to the short pieces of chain - with like 8" pieces coming down from the bar.

07-19-2022, 01:02 PM	#5
tubman Senior Member Join Date: Dec 2013 Location: Minnesota, Florida Keys Posts: 11,629	Re: Engine Lifting Question Sponsored Links (Register now to hide all advertisements) I made a set of metal tabs that will fit under the head bolts, even with finned heads. I use carabiners to attach the chain to these tabs.