The Ford Barn

Road Journey · 07-03-2022, 09:14 AM

Came with bunch of 35 Ford parts but can't be certain. Junk or worth cleaning up? Thank you.

38 coupe · 07-03-2022, 10:45 AM

I wouldn't scrap those shocks. I'm guessing they aren't 32 or other rarer versions. If you don't want them and if they have small value, then just offer them for free with local pickup, someone will take them.

petehoovie · 07-03-2022, 12:41 PM

Quote:

Originally Posted by Road Journey

Came with bunch of 35 Ford parts but can't be certain. Junk or worth cleaning up? Thank you.

Brian · 07-03-2022, 02:57 PM

The two on the left will fit the rear of your 35

Road Journey · 07-03-2022, 04:26 PM

Quote:

Originally Posted by Brian

The two on the left will fit the rear of your 35

Thanks. Two on the right?

V8COOPMAN · 07-03-2022, 04:44 PM

Sponsored Links (Register now to hide all advertisements)

Quote:

Originally Posted by Brian

The two on the left will fit the rear of your 35

You mean even though they are not a matching pair? Coop

.

Road Journey · 07-03-2022, 05:06 PM

If anyone knows what they are. I'd like to ID all four if possible.

Brian · 07-03-2022, 05:47 PM

You mean even though they are not a matching pair? Coop

I stated they would fit the rear of a 35, irrespective that they are not a matched pair. 35-36 rear shocks mount inside the chassis rails, the square shafts protrude through the chassis and arms bolt on. Now, whether those pictured shocks are/were original to a 35-36 I dunno, I merely stated they would fit.

V8COOPMAN · 07-04-2022, 12:52 AM

Quote:

Originally Posted by Brian

You mean even though they are not a matching pair? Coop

I stated they would fit the rear of a 35, irrespective that they are not a matched pair. 35-36 rear shocks mount inside the chassis rails, the square shafts protrude through the chassis and arms bolt on. Now, whether those pictured shocks are/were original to a 35-36 I dunno, I merely stated they would fit.

Gotcha! Coop

.

deuce lover · 07-04-2022, 02:05 AM

The 2 on the right mount on the outside of the frame rail and might work on your '35.Do you have the arms?

Brian · 07-04-2022, 03:22 AM

https://www.applehydraulicsonline.co...ns/ford?page=2

JM 35 Sedan · 07-04-2022, 06:25 AM

You could send them to Andy and have him check them out to determine what year vehicle they will fit, if they are good cores, and possible candidates for rebuild.

Andrew Falandes
789 Tea St.
Charlemont, MA 01339
Phone: 413 768-8487
Email: [email protected]

Road Journey · 07-04-2022, 06:38 AM

Thanks John.

Road Journey · 07-04-2022, 06:41 AM

Quote:

Originally Posted by V8COOPMAN

You mean even though they are not a matching pair? Coop

.

If someone knows what these parts are Brian, I'd like to know too.

Road Journey · 07-04-2022, 06:44 AM

Quote:

Originally Posted by deuce lover

The 2 on the right mount on the outside of the frame rail and might work on your '35.Do you have the arms?

No arms.

Road Journey · 07-04-2022, 06:46 AM

Quote:

Originally Posted by Brian

You mean even though they are not a matching pair? Coop

I stated they would fit the rear of a 35, irrespective that they are not a matched pair. 35-36 rear shocks mount inside the chassis rails, the square shafts protrude through the chassis and arms bolt on. Now, whether those pictured shocks are/were original to a 35-36 I dunno, I merely stated they would fit.

Thanks Brian.

Terry,OH · 07-05-2022, 06:45 AM

Far left is a later (post 39) rebuild of the rear shock for 34-36 the two on the right, with missing arms are also missing adjusters and will not hold fluid.

07-03-2022, 10:45 AM	#2
38 coupe Senior Member Join Date: May 2010 Location: South Texas Posts: 2,042	Re: Can You Help Me ID these Parts? I wouldn't scrap those shocks. I'm guessing they aren't 32 or other rarer versions. If you don't want them and if they have small value, then just offer them for free with local pickup, someone will take them.

07-03-2022, 02:57 PM	#4
Brian Senior Member Join Date: May 2010 Location: Masterton, New Zealand Posts: 3,998	Re: Can You Help Me ID these Parts? The two on the left will fit the rear of your 35 __________________ Unfortunately, two half wits don't make a whole wit!

07-03-2022, 05:06 PM	#7
Road Journey Member Join Date: Nov 2012 Location: Avon, Indiana Posts: 41	Re: Can You Help Me ID these Parts? If anyone knows what they are. I'd like to ID all four if possible.

07-03-2022, 05:47 PM	#8
Brian Senior Member Join Date: May 2010 Location: Masterton, New Zealand Posts: 3,998	Re: Can You Help Me ID these Parts? You mean even though they are not a matching pair? Coop I stated they would fit the rear of a 35, irrespective that they are not a matched pair. 35-36 rear shocks mount inside the chassis rails, the square shafts protrude through the chassis and arms bolt on. Now, whether those pictured shocks are/were original to a 35-36 I dunno, I merely stated they would fit. __________________ Unfortunately, two half wits don't make a whole wit!

07-04-2022, 02:05 AM	#10
deuce lover Senior Member Join Date: May 2010 Location: Southern France Posts: 5,837	Re: Can You Help Me ID these Parts? The 2 on the right mount on the outside of the frame rail and might work on your '35.Do you have the arms?

07-04-2022, 03:22 AM	#11
Brian Senior Member Join Date: May 2010 Location: Masterton, New Zealand Posts: 3,998	Re: Can You Help Me ID these Parts? https://www.applehydraulicsonline.co...ns/ford?page=2 __________________ Unfortunately, two half wits don't make a whole wit!

07-04-2022, 06:25 AM	#12
JM 35 Sedan Senior Member Join Date: May 2010 Location: Near Rising Sun, Maryland Posts: 10,876	Re: Can You Help Me ID these Parts? You could send them to Andy and have him check them out to determine what year vehicle they will fit, if they are good cores, and possible candidates for rebuild. Andrew Falandes 789 Tea St. Charlemont, MA 01339 Phone: 413 768-8487 Email: [email protected] __________________ *John* *"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein*

07-04-2022, 06:38 AM	#13
Road Journey Member Join Date: Nov 2012 Location: Avon, Indiana Posts: 41	Re: Can You Help Me ID these Parts? Thanks John.

07-05-2022, 06:45 AM	#17
Terry,OH Senior Member Join Date: May 2010 Posts: 5,187	Re: Can You Help Me ID these Parts? Far left is a later (post 39) rebuild of the rear shock for 34-36 the two on the right, with missing arms are also missing adjusters and will not hold fluid.