The Ford Barn

JamesD176 · 05-09-2022, 05:00 PM

I have a 1930 AA with a cast iron warford. I pulled the warford to replace bearings as something didn't feel and sound right. In the process I found the 6x10 ujoint was starting to go bad. The ends are still good enough to reuse if I can find a rebuild kit AA-7084. Any leads would be appreciated.

Thanks

James

katy · 05-10-2022, 11:31 AM

Is that different than: A-7084

JamesD176 · 05-10-2022, 11:36 AM

Yes the center is square instead of round and the bushings are bigger.

JamesD176 · 05-10-2022, 11:57 AM

https://www.fordbarn.com/forum/album.php?albumid=5618&pictureid=44719[/IMG]

eagle · 05-11-2022, 10:10 PM

Sponsored Links (Register now to hide all advertisements)

Not sure if this'll help or not...
https://modelagarage.com/service_let...iversal-joint/

05-09-2022, 05:00 PM	#1
JamesD176 Junior Member Join Date: May 2022 Posts: 10	AA-7084.... the missing piece I have a 1930 AA with a cast iron warford. I pulled the warford to replace bearings as something didn't feel and sound right. In the process I found the 6x10 ujoint was starting to go bad. The ends are still good enough to reuse if I can find a rebuild kit AA-7084. Any leads would be appreciated. Thanks James

05-10-2022, 11:31 AM	#2
katy Senior Member Join Date: Jun 2015 Location: Red Deer, Alberta Posts: 5,715	Re: AA-7084.... the missing piece Is that different than: A-7084 __________________ If you don't hear a rumor by 10 AM, start one!. Got my education out behind the barn!

05-10-2022, 11:36 AM	#3
JamesD176 Junior Member Join Date: May 2022 Posts: 10	Re: AA-7084.... the missing piece Yes the center is square instead of round and the bushings are bigger.

05-10-2022, 11:57 AM	#4
JamesD176 Junior Member Join Date: May 2022 Posts: 10	Re: AA-7084.... the missing piece https://www.fordbarn.com/forum/album.php?albumid=5618&pictureid=44719[/IMG]

05-11-2022, 10:10 PM	#5
eagle Senior Member Join Date: Aug 2011 Location: Eagle Bend, MN Posts: 2,081	Re: AA-7084.... the missing piece Sponsored Links (Register now to hide all advertisements) Not sure if this'll help or not... https://modelagarage.com/service_let...iversal-joint/ __________________ "There are some that can destroy an anvil with a teaspoon and shouldn't be allowed to touch anything resembling a tool."