The Ford Barn

BashawT · 01-19-2022, 11:55 AM

Can anyone identify the name of the part outlined in the attached photo? I am having a bear of a time finding the screws that mount it in place. I also believe that the lower portion was riveted in place.

Thank you!

Bob C · 01-19-2022, 12:59 PM

According to the Body Parts List it looks like the inner quarter panel assembly.

BashawT · 01-19-2022, 01:29 PM

Thanks Bob, does anyone have any intel on what hardware would be used to fasten?

Tinbasher · 01-19-2022, 07:07 PM

If I remember there 10-32 or 12-24 machine screws. Run a tap down it will soon tell you.

bobbader · 01-19-2022, 09:28 PM

10/32 X1/2" flat head machine screws.

BashawT · 01-20-2022, 10:00 AM

Sponsored Links (Register now to hide all advertisements)

Quote:

Originally Posted by bobbader

10/32 X1/2" flat head machine screws.

Thank you!

hazelhoff · 01-21-2022, 03:43 PM

Rightfully so ! Same screws that hold the ‘thing’ right under the steering wheel to support the two levers …
Not knowing I ended up buying a hole lot of them instead of the right interior mounting kit haha

01-19-2022, 11:55 AM	#1
BashawT Senior Member Join Date: Feb 2011 Location: Green Bay, WI Posts: 316	Body Interior Panel Identification Can anyone identify the name of the part outlined in the attached photo? I am having a bear of a time finding the screws that mount it in place. I also believe that the lower portion was riveted in place. Thank you!

01-19-2022, 12:59 PM	#2
Bob C Senior Member Join Date: May 2010 Location: So Cal Posts: 9,360	Re: Body Interior Panel Identification According to the Body Parts List it looks like the inner quarter panel assembly.

01-19-2022, 01:29 PM	#3
BashawT Senior Member Join Date: Feb 2011 Location: Green Bay, WI Posts: 316	Re: Body Interior Panel Identification Thanks Bob, does anyone have any intel on what hardware would be used to fasten?

01-19-2022, 07:07 PM	#4
Tinbasher Senior Member Join Date: May 2010 Location: Innisfil, Ontario Canada Posts: 1,205	Re: Body Interior Panel Identification If I remember there 10-32 or 12-24 machine screws. Run a tap down it will soon tell you.

01-19-2022, 09:28 PM	#5
bobbader Senior Member Join Date: May 2010 Location: Huntington, NY Posts: 352	Re: Body Interior Panel Identification 10/32 X1/2" flat head machine screws.

01-21-2022, 03:43 PM	#7
hazelhoff Senior Member Join Date: Dec 2013 Location: The Netherlands Posts: 387	Re: Body Interior Panel Identification Rightfully so ! Same screws that hold the ‘thing’ right under the steering wheel to support the two levers … Not knowing I ended up buying a hole lot of them instead of the right interior mounting kit haha __________________ You don’t own a Model A ... it owns you !