|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Junior Member
Join Date: Dec 2019
Posts: 26
|
![]()
Has anyone had to replace any spokes on a banjo steering wheel? I have a few broken ones and was curious on the best way to do so. Are they stainless? I assume they just wont slide through the little bracket in the middle. I'd appreciate help.
Thanks -Andrew |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: May 2010
Location: Above the gnat line in Georgia
Posts: 7,082
|
![]()
I had a couple of broken spokes welded by a very experienced stainless steel welder. Its a PITA to repair one of these banjo wheels, but it can be done. Use PC7 to repair the outer rim.
__________________
Life is like a roll of toilet paper. The closer to the end, the faster it goes. It is better to be seen, than viewed. "We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm". |
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: May 2010
Posts: 2,260
|
![]()
Don't make any hard turns. When one breaks, the rest can fail like falling dominoes and distort the rim.
|
![]() |
![]() |
![]() |
#4 |
Junior Member
Join Date: Dec 2019
Posts: 26
|
![]()
So I should find a back up wheel, just in case.
|
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: May 2010
Posts: 2,260
|
![]()
Yes if it was mine. Then google search keywords banjo steering wheel restoration and pick somebody. It's gonna cost. But it sure is pretty. But pretty high maintenance too.
|
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: May 2012
Location: Queensland, Australia
Posts: 12,016
|
![]() Sponsored Links (Register now to hide all advertisements)
Broken Spoke in Banjo Steering Wheel. |
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: May 2010
Posts: 2,260
|
![]()
>>>Broken Spoke>>>
Think are 3 busted so far. 8^) |
![]() |
![]() |
![]() |
#8 |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 11,606
|
![]()
Have you considered this steering wheel replacement ?
https://www.jegs.com/i/Limeworks/677...oaAtxaEALw_wcB Last edited by 19Fordy; 09-18-2021 at 10:42 AM. |
![]() |
![]() |
![]() |
#9 |
Senior Member
Join Date: May 2010
Posts: 2,260
|
![]()
Wow. Is that in Zimbabwean dollars? With free shipping too! 8^)
|
![]() |
![]() |
![]() |
#10 |
Senior Member
Join Date: Sep 2013
Location: SoCal-Redlands
Posts: 3,413
|
![]()
Last time I checked for a stock repop banjo for my '39 p/u all the usual suspects showed it was out of stock.
__________________
Making the simple complicated for over 30 years. |
![]() |
![]() |
![]() |
#11 |
Junior Member
Join Date: Dec 2019
Posts: 26
|
![]()
I knew they were pricey. My dad has a limeworks wheel for his chevy. Nice wheel though
|
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|