The Ford Barn

Ghost of elmirage · 03-04-2011, 10:58 AM

Do I need any kind of adapter to mount model A wheels to the F1 front drums? Thanks for any info

Geoff

Mart · 03-04-2011, 12:55 PM

Sponsored Links (Register now to hide all advertisements)

Not a preferred fitment, you would need a very thick spacer and would have king pin offset problems. The Wires are best fitted to 40-48 type drums, and even then there is one type that fits better and a small spacer ring is needed around the hole in the center of the wheel.
If you can use steels they will bolt right up to the f1 drums.
Mart.

03-04-2011, 10:58 AM	#1
Ghost of elmirage Senior Member Join Date: May 2010 Location: Worcester , Mass Posts: 300	F1 brakes to Model A wheels? Do I need any kind of adapter to mount model A wheels to the F1 front drums? Thanks for any info Geoff

03-04-2011, 12:55 PM	#2
Mart Senior Member Join Date: May 2010 Location: Solihull, England. Posts: 9,088	Re: F1 brakes to Model A wheels? Sponsored Links (Register now to hide all advertisements) Not a preferred fitment, you would need a very thick spacer and would have king pin offset problems. The Wires are best fitted to 40-48 type drums, and even then there is one type that fits better and a small spacer ring is needed around the hole in the center of the wheel. If you can use steels they will bolt right up to the f1 drums. Mart.