The Ford Barn

Steve Plucker · 05-15-2021, 11:31 AM

Model A horns...Just how does the motor assembly inside a Stewart-Warner horn differ from the motor assembly in an EA horn?

Thanks.

Steve Plucker

Bob C · 05-15-2021, 12:17 PM

Somebody asked a similar question before.

Check out the link in the second post of the thread at the link below.
https://www.fordbarn.com/forum/showt...ighlight=horns

Steve Plucker · 05-15-2021, 12:46 PM

Quote:

Originally Posted by Bob C

Somebody asked a similar question before.

Check out the link in the second post of the thread at the link below.
https://www.fordbarn.com/forum/showt...ighlight=horns

HA...How time flies Bob...I completly forgot about that !!!!

Thank you!

Pluck

modelaer · 05-21-2021, 02:11 PM

Sponsored Links (Register now to hide all advertisements)

While I have never worked on an EA horn I can tell you the Stewart Warner horn is wound opposite from a Sparton horn and rotates in the opposite direction. The SW horn has left hand treads for the ratchet washer nut.

05-15-2021, 11:31 AM	#1
Steve Plucker BANNED Join Date: May 2010 Location: Walla Walla, Washington USA Posts: 6,066	Stewart-Warner vs EA Horns Model A horns...Just how does the motor assembly inside a Stewart-Warner horn differ from the motor assembly in an EA horn? Thanks. Steve Plucker

05-15-2021, 12:17 PM	#2
Bob C Senior Member Join Date: May 2010 Location: So Cal Posts: 9,360	Re: Stewart-Warner vs EA Horns Somebody asked a similar question before. Check out the link in the second post of the thread at the link below. https://www.fordbarn.com/forum/showt...ighlight=horns

05-21-2021, 02:11 PM	#4
modelaer Member Join Date: May 2010 Location: Essex, VT Posts: 40	Re: Stewart-Warner vs EA Horns Sponsored Links (Register now to hide all advertisements) While I have never worked on an EA horn I can tell you the Stewart Warner horn is wound opposite from a Sparton horn and rotates in the opposite direction. The SW horn has left hand treads for the ratchet washer nut.