The Ford Barn

highbeams · 10-01-2021, 07:30 PM

What is a procedure to woodgrain a dash and window moldings?

Thank you.

highbeams

Kube · 10-01-2021, 09:17 PM

Quote:

Originally Posted by highbeams

What is a procedure to woodgrain a dash and window moldings?

Thank you.

highbeams

Send them to Jonathan at Honest Charley's.

highbeams · 10-02-2021, 04:22 AM

Quote:

Originally Posted by Kube

Send them to Jonathan at Honest Charley's.

Thank you! I will. Is he in heaven . . . . .or 'some other place?

I will need a location as there are lotsa Honest Charley's . . . or say that they are Honest Charley.

rufus39 · 10-02-2021, 05:50 AM

Click on link..........https://honestcharley.com/

Kube · 10-02-2021, 08:25 AM

Quote:

Originally Posted by highbeams

Thank you! I will. Is he in heaven . . . . .or 'some other place?

I will need a location as there are lotsa Honest Charley's . . . or say that they are Honest Charley.

Jonathan has done numerous sets for me. I'd typically send him three, sometimes four sets at a time. He always came through when promised. Prices are reasonable and quality second to none.

RB · 10-02-2021, 10:37 AM

Sponsored Links (Register now to hide all advertisements)

If your interested I can provide info. here in Nebraska of a water transfer method, had my dash, A pillars, rear window frame & both door mouldings done on my 32 sport coupe,no quarter window trim on the sport coupes as you probably know. I used a burl wood pattern (non original to the car) with satin clear coat. Ron

blucar · 10-02-2021, 11:11 AM

I had a man wood-grain the dash/sills for my 39 convert and a couple other cars that use to be a the Pamona Swap Meet, he got so busy he quit the swap meet. The work he did was first class, he is located in Anahiem. I have got to look up his address, I want to get the dash, etc., wood-grained for my '36 Ford.

DavidG · 10-02-2021, 12:08 PM

Or Bill Gratkowski in Pennsylvania ([email protected]) who has done most of mine.

rockfla · 10-02-2021, 01:20 PM

High beams
There was a post several months back to maybe a year ago about doing/learning woodgraining. There is a specialty supplier for that purpose, I “think” 46woodiewagon here on the barn started to learn and is doing his own graining! SO if your question is based on learning how yourself, you might do a search here on the barn and find that post!!

Karl · 10-02-2021, 03:56 PM

I've done my own using the Grain- it kit
It takes practice but with time good results are obtainable

10-01-2021, 07:30 PM	#1
highbeams Senior Member Join Date: Dec 2014 Location: California Posts: 914	interior woodgrain What is a procedure to woodgrain a dash and window moldings? Thank you. highbeams

10-02-2021, 05:50 AM	#4
rufus39 Senior Member Join Date: Jun 2012 Location: North Georgia Posts: 111	Re: interior woodgrain Click on link..........https://honestcharley.com/

10-02-2021, 10:37 AM	#6
RB Senior Member Join Date: May 2010 Location: papillion nebraska Posts: 412	Re: interior woodgrain Sponsored Links (Register now to hide all advertisements) If your interested I can provide info. here in Nebraska of a water transfer method, had my dash, A pillars, rear window frame & both door mouldings done on my 32 sport coupe,no quarter window trim on the sport coupes as you probably know. I used a burl wood pattern (non original to the car) with satin clear coat. Ron

10-02-2021, 11:11 AM	#7
blucar Senior Member Join Date: Jul 2010 Location: Ventura, CA Posts: 2,466	Re: interior woodgrain I had a man wood-grain the dash/sills for my 39 convert and a couple other cars that use to be a the Pamona Swap Meet, he got so busy he quit the swap meet. The work he did was first class, he is located in Anahiem. I have got to look up his address, I want to get the dash, etc., wood-grained for my '36 Ford. __________________ Bill.... 36 5 win cpe

10-02-2021, 12:08 PM	#8
DavidG Senior Member Join Date: May 2010 Location: southeastern Michigan Posts: 10,599	Re: interior woodgrain Or Bill Gratkowski in Pennsylvania ([email protected]) who has done most of mine.

10-02-2021, 01:20 PM	#9
rockfla Senior Member Join Date: Mar 2014 Location: Jacksonville FL Posts: 4,804	Re: interior woodgrain High beams There was a post several months back to maybe a year ago about doing/learning woodgraining. There is a specialty supplier for that purpose, I “think” 46woodiewagon here on the barn started to learn and is doing his own graining! SO if your question is based on learning how yourself, you might do a search here on the barn and find that post!!

10-02-2021, 03:56 PM	#10
Karl Senior Member Join Date: May 2010 Location: Manawatu, New Zealand Posts: 1,420	Re: interior woodgrain I've done my own using the Grain- it kit It takes practice but with time good results are obtainable __________________ Such a fine sight to see-Its a Girl, My Lord, in a Flatbed Ford slowin' down to take a look at me.