07-12-2020, 11:36 AM
|
#1 |
|
Member
Join Date: Jul 2020
Location: Southern Michigan
Posts: 77
|
1953 f100
Hello everyone , my first post , I'm trying to get the backing plates off a 1953 f100 rear end to use on my model a , are the axles C clip , or do I just need a slide hammer to pull them out .
Vern |
|
|
|
07-12-2020, 11:49 AM
|
#2 |
|
Senior Member
Join Date: May 2010
Location: East Hartford, Ct
Posts: 5,898
|
Re: 1953 f100
Once the 4 bolts are removed, the axle assy with the outer bearing may just pull out. (no C clip) If not a little persuasion may be required.
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES |
|
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
07-12-2020, 11:50 AM
|
#3 |
|
Senior Member
Join Date: May 2010
Posts: 931
|
Re: 1953 f100
If the axle has a rear backing plate center cover (Dana/spicer) they are the clip style , if it has a pop out differential it is not the clip in type ,I have seen those axles replaced with later 9 inch pop out the front style housing .
|
|
|
|
|
07-12-2020, 01:52 PM
|
#4 |
|
Member
Join Date: Jul 2020
Location: Southern Michigan
Posts: 77
|
Re: 1953 f100
Sponsored Links (Register now to hide all advertisements)
Vern |
|
|
|
 |
«
Previous Thread
|
Next Thread
»
Linear Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 10:47 AM.