The Ford Barn

mercury 48 · 04-14-2020, 03:14 PM

I have bob drake quarter window front edge seal. i can't figure them out to install the seal. Part #21A-7630106.

A bones · 04-15-2020, 07:16 PM

btt

paul2748 · 04-15-2020, 07:33 PM

On my 48, if I remember correctly, I put one edge in and then, using a flat bladed tool (like a putty knife) and squeeze in the other side. I've also used a regular flat blade screwdriver. Use some liquid soap and water if it gives you a hard time, but I did it dry.

flathead48 · 04-15-2020, 08:55 PM

Sponsored Links (Register now to hide all advertisements)

X2 for paul2748

04-14-2020, 03:14 PM	#1
mercury 48 Member Join Date: Dec 2012 Location: Downriver, Michigan Posts: 39	1948 convertible quarter window edge seal question I have bob drake quarter window front edge seal. i can't figure them out to install the seal. Part #21A-7630106.

04-15-2020, 07:33 PM	#3
paul2748 Senior Member Join Date: May 2010 Location: Midland Park, NJ Posts: 4,290	Re: 1948 convertible quarter window edge seal question On my 48, if I remember correctly, I put one edge in and then, using a flat bladed tool (like a putty knife) and squeeze in the other side. I've also used a regular flat blade screwdriver. Use some liquid soap and water if it gives you a hard time, but I did it dry. __________________ 48 Ford Conv 56 Tbird 54 Ford Victoria

04-15-2020, 08:55 PM	#4
flathead48 Senior Member Join Date: May 2010 Location: Saratoga Springs, NY Posts: 1,235	Re: 1948 convertible quarter window edge seal question Sponsored Links (Register now to hide all advertisements) X2 for paul2748

04-15-2020, 07:16 PM	#2
A bones Senior Member Join Date: May 2010 Location: CLAYTON DE Posts: 1,350	Re: 1948 convertible quarter window edge seal question btt __________________ Enjoy yer day. Tom Hate can't fix what it started.