The Ford Barn

Ratspit · 03-18-2019, 09:39 AM

I was wondering if anyone knew how to disassemble a 34 brake lever? I would like to remove the button, spring and rod assembly so that I can refinish the parts. Thank you.

DavidG · 03-18-2019, 10:45 AM

Raise the button as far as it will go and you will observe a pin near the bottom of the shank of the button. Drive the pin out, pull the button off the rod, pull the rod out from the bottom, and extract the spring from the top. Put it back together in reverse order.

Ratspit · 03-18-2019, 09:59 PM

Thank you your description worked perfectly.

DavidG · 03-18-2019, 10:31 PM

Sponsored Links (Register now to hide all advertisements)

You're welcome!

03-18-2019, 10:45 AM	#2
DavidG Senior Member Join Date: May 2010 Location: southeastern Michigan Posts: 10,601	Re: 34 Brake lever question Raise the button as far as it will go and you will observe a pin near the bottom of the shank of the button. Drive the pin out, pull the button off the rod, pull the rod out from the bottom, and extract the spring from the top. Put it back together in reverse order.

03-18-2019, 09:59 PM	#3
Ratspit Junior Member Join Date: Feb 2018 Location: PA Posts: 24	Re: 34 Brake lever question Thank you your description worked perfectly.

03-18-2019, 10:31 PM	#4
DavidG Senior Member Join Date: May 2010 Location: southeastern Michigan Posts: 10,601	Re: 34 Brake lever question Sponsored Links (Register now to hide all advertisements) You're welcome!