The Ford Barn

sphooch · 02-04-2019, 11:34 AM

I've decided to take apart my extra carb. and in doing so found these markings on it I hope some of you guys can explain. the lower half stamped zenith 1 .....the letter E in raised form is in the center on the opposite side of the secondary well position and stamped in about 1-1/4 in. inboard past the choke hole is the # 59 ..on the upper half at the throttle hole raised is the #B50 then inside the carb on the float bowel section is the raised letter H and raised # 29 ...Holly?? I'd appreciate any help in this thanks THE HOOCH

Brentwood Bob · 02-04-2019, 11:44 AM

Sponsored Links (Register now to hide all advertisements)

Mixed castings. Need some pictures to clarify but the top would be Holly, the bottom Zenith.

02-04-2019, 11:34 AM	#1
sphooch Senior Member Join Date: Jan 2012 Location: New Jersey Posts: 362	zenith 1 identifaction help I've decided to take apart my extra carb. and in doing so found these markings on it I hope some of you guys can explain. the lower half stamped zenith 1 .....the letter E in raised form is in the center on the opposite side of the secondary well position and stamped in about 1-1/4 in. inboard past the choke hole is the # 59 ..on the upper half at the throttle hole raised is the #B50 then inside the carb on the float bowel section is the raised letter H and raised # 29 ...Holly?? I'd appreciate any help in this thanks THE HOOCH

02-04-2019, 11:44 AM	#2
Brentwood Bob Senior Member Join Date: May 2010 Location: brentwood, ca Posts: 4,420	Re: zenith 1 identifaction help Sponsored Links (Register now to hide all advertisements) Mixed castings. Need some pictures to clarify but the top would be Holly, the bottom Zenith.