The Ford Barn

oswego37 · 12-08-2018, 08:50 AM

After adding 600W oil to the steering box on a 1941 ford, knocked a small bolt in through the filler hole. Cannot retrieve with a magnet. There are 4 bolts that hold the cover on which I removed. Was hoping to be able to remove the cover to get at the bolt, but is still being held in place. Any suggestions on being able to access the inside of the gear box would be appreciated.

skidmarks · 12-08-2018, 08:53 AM

You have to take the nut off the sector adjustment on the cover then hold the cover and turn the stud with a screwdriver till there is enough clearance to slide it out of the sector. Then the cover will slide off

oswego37 · 12-08-2018, 09:04 AM

Sponsored Links (Register now to hide all advertisements)

Thanks. I did try to get that nut off but with out over doing it. It did not move, but based on your suggestion I'll keep working on it.

12-08-2018, 08:50 AM	#1
oswego37 Senior Member Join Date: Dec 2015 Location: Oswego, NY Posts: 124	41 steering box question After adding 600W oil to the steering box on a 1941 ford, knocked a small bolt in through the filler hole. Cannot retrieve with a magnet. There are 4 bolts that hold the cover on which I removed. Was hoping to be able to remove the cover to get at the bolt, but is still being held in place. Any suggestions on being able to access the inside of the gear box would be appreciated.

12-08-2018, 08:53 AM	#2
skidmarks Senior Member Join Date: Aug 2010 Location: newark, delaware Posts: 3,780	Re: 41 steering box question You have to take the nut off the sector adjustment on the cover then hold the cover and turn the stud with a screwdriver till there is enough clearance to slide it out of the sector. Then the cover will slide off

12-08-2018, 09:04 AM	#3
oswego37 Senior Member Join Date: Dec 2015 Location: Oswego, NY Posts: 124	Re: 41 steering box question Sponsored Links (Register now to hide all advertisements) Thanks. I did try to get that nut off but with out over doing it. It did not move, but based on your suggestion I'll keep working on it.