The Ford Barn

brady1929 · 08-25-2018, 08:34 PM

Hello,
I need the rivets that hold the "L" shaped bracket to the front of the cowl on a 1932 ford 5w coupe. A long bolt goes through the "L" shaped bracket into one of firewall feet and into the frame. Where would I find a part number? Thanks

Charlie Stephens · 08-25-2018, 08:58 PM

I had these handy from answering your question on HAMB so I thought I would post them here and save other people time. Does this match what other people are finding?
Charlie Stephens

DavidG · 08-25-2018, 09:52 PM

Sponsored Links (Register now to hide all advertisements)

As the part in question was most likely not offered through service, no part number would be listed in any Ford body service part catalogue. No doubt such a number exists, but would only be found searching through the engineering drawings for bodies at the Benson Ford Research Center in Dearborn.

It is the same part on all '32 bodies and not unique to standard coupes.

08-25-2018, 08:34 PM	#1
brady1929 Member Join Date: May 2010 Posts: 45	1932 5w cowl bracket rivets Hello, I need the rivets that hold the "L" shaped bracket to the front of the cowl on a 1932 ford 5w coupe. A long bolt goes through the "L" shaped bracket into one of firewall feet and into the frame. Where would I find a part number? Thanks

08-25-2018, 09:52 PM	#3
DavidG Senior Member Join Date: May 2010 Location: southeastern Michigan Posts: 10,601	Re: 1932 5w cowl bracket rivets Sponsored Links (Register now to hide all advertisements) As the part in question was most likely not offered through service, no part number would be listed in any Ford body service part catalogue. No doubt such a number exists, but would only be found searching through the engineering drawings for bodies at the Benson Ford Research Center in Dearborn. It is the same part on all '32 bodies and not unique to standard coupes.