The Ford Barn

Dbbc · 07-03-2018, 02:19 PM

Aloha,
I have a issue with the speedometer, I narrowed down (I believed) to the speedo gear on the drive shaft, it is moving back and forth. I think it maybe that either the retaining clip as slipped out of the groove or it is broken. Is there a way to get to the retaining clip without removing the whole drive shaft?
Any help greatly appreciated.
mahalo

Kurt in NJ · 07-03-2018, 08:11 PM

Sponsored Links (Register now to hide all advertisements)

take off the speedo "turtle" and look in, feel around with pick/long thin screwdriver---coat hanger wire--etc----if it is missing work some wire around and twist it

07-03-2018, 02:19 PM	#1
Dbbc Senior Member Join Date: Apr 2014 Location: Honolulu Posts: 116	Speedo gear retaining clip Aloha, I have a issue with the speedometer, I narrowed down (I believed) to the speedo gear on the drive shaft, it is moving back and forth. I think it maybe that either the retaining clip as slipped out of the groove or it is broken. Is there a way to get to the retaining clip without removing the whole drive shaft? Any help greatly appreciated. mahalo

07-03-2018, 08:11 PM	#2
Kurt in NJ Senior Member Join Date: May 2010 Location: on the Littlefield Posts: 6,556	Re: Speedo gear retaining clip Sponsored Links (Register now to hide all advertisements) take off the speedo "turtle" and look in, feel around with pick/long thin screwdriver---coat hanger wire--etc----if it is missing work some wire around and twist it