Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-07-2018, 07:12 PM   #1
BillCNC
Senior Member
 
BillCNC's Avatar
 
Join Date: Aug 2017
Location: SoCal Desert
Posts: 842
Question Water Hoses

Hello All,

Well, I'm at the end of my chassis rebuild. Everything is ready to go, ... 3 new Red Stripe Hoses, a new Tube w/ new Water Drain with 6 new clamps.

As I am filling up the radiator in anticipation to hear her run again, water is leaking from the 4 lower clamps and wouldn't yeah know it, right onto the dip stick, ... like their sealed. Anyhow, I'm assuming the upper hose will leak as well.

All clamps are tightened to the point just shy of stripping the screws. Correct diameter clamps are used (4 smaller, 2 larger).

Can one somehow shrink the hose diameter, if not, ... does Autozone, O'Reilly Auto parts or Napa have something that can be used?

Regards
Bill
BillCNC is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 05:26 PM.