The Ford Barn

Chuck Sea/Tac · 01-16-2018, 12:59 AM

Is the nut on the end of the armature a left hand thread? I kinda remember it is, it cannot find any info that collaborates it. It’s a Stewart warner.

Drive Shaft Dave · 01-16-2018, 01:11 AM

Yes, it is left hand thread on a Stewart Warner. Turn nut to right to loosen.

mrtexas · 01-16-2018, 11:29 AM

Sponsored Links (Register now to hide all advertisements)

https://sites.google.com/site/mrtexa...s/home/idhorns

01-16-2018, 12:59 AM	#1
Chuck Sea/Tac Senior Member Join Date: May 2010 Location: Between Seattle & Tacoma Posts: 2,411	Hornnut removal Is the nut on the end of the armature a left hand thread? I kinda remember it is, it cannot find any info that collaborates it. It’s a Stewart warner.

01-16-2018, 01:11 AM	#2
Drive Shaft Dave Senior Member Join Date: Dec 2011 Location: New hope Minnesota Posts: 742	Re: Hornnut removal Yes, it is left hand thread on a Stewart Warner. Turn nut to right to loosen.

01-16-2018, 11:29 AM	#3
mrtexas Senior Member Join Date: May 2010 Location: Sugar Land, TX Posts: 4,420	Re: Hornnut removal Sponsored Links (Register now to hide all advertisements) https://sites.google.com/site/mrtexa...s/home/idhorns __________________ 41 woodie https://41fordwoodie.weebly.com/