|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
Join Date: Nov 2010
Location: SPRUCE PINE NC
Posts: 446
|
![]()
I am getting ready to put the body back on the chassis & I have a question about the wood piece that is at position #4
There are three other holes in that piece of wood. What goes in those holes??? And if there are bolts--what type & size??? Sorry the pix is upside down--I tried twice and both times the website turned it around. ![]() |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Jun 2010
Posts: 993
|
![]()
What body style do you have? I think what you are looking at is the long wood piece that goes across from one frame rail to the other. If so this is or a 28/29 tudor and there should be 4 holes, these holes are for the seat studs that anchor the front seats.
|
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: Nov 2010
Location: SPRUCE PINE NC
Posts: 446
|
![]()
Ah! You are so right! Thanks for the reply!
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: May 2010
Location: Fresno, Ca.
Posts: 3,636
|
![]()
I saved this, it was in a garbage can at an old parts house,..I believe it's a Tudor.
Nice detail of the anti-squeak and the nailing pattern. View,..top and bottom on the same side.. |
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Nov 2010
Location: SPRUCE PINE NC
Posts: 446
|
![]() Sponsored Links (Register now to hide all advertisements)
|
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|