The Ford Barn

farmerdick · 12-24-2016, 06:41 AM

Hey Guys, How do I identify a F1 steering box from a F2?

Thanks
Richard

Barry-ct · 12-24-2016, 07:15 AM

48-52 F-1 thru F-3 are the same, unless they've put a larger F-4 box in, Could also be a later box.

farmerdick · 12-24-2016, 07:26 AM

Thanks. How would I know if it was newer than 52`?

skidmarks · 12-24-2016, 07:56 AM

48 to 52 uses tapered splines with a nut on the end of the sector. 53 to 60 uses a pitman arm with a pinch bolt at the top similar to the way the king pin is held in the front axle. The 48 to 52 is the better choice in a AV8 because it gives better room around the left rear exhaust port.

JSeery · 12-24-2016, 09:58 AM

What were talking about is F1 vs F100 steering box. They are very different in appearance, there was a recent post on the Barn that had photos of the differences.

http://fordbarn.com/forum/showthread...t=steering+box

cas3 · 12-24-2016, 11:09 AM

Sponsored Links (Register now to hide all advertisements)

f1-worm gear below the sector, f100 worm gear above the sector, when viewed as would be placed in the vehicle

farmerdick · 12-24-2016, 11:15 AM

I believe I have a 53 to 60 box. Anyone interested in trading this box for the earlier model? Thank you again for the clarification. You guys are life savers.

farmerdick · 12-24-2016, 11:18 AM

PS: Everyone Have a safe and wonderful Christmas.

12-24-2016, 06:41 AM	#1
farmerdick Senior Member Join Date: Nov 2011 Location: Readfield, Maine Posts: 349	F1 Steering Box Hey Guys, How do I identify a F1 steering box from a F2? Thanks Richard

12-24-2016, 07:15 AM	#2
Barry-ct Senior Member Join Date: May 2010 Location: Newington, Connecticut Posts: 1,374	Re: F1 Steering Box 48-52 F-1 thru F-3 are the same, unless they've put a larger F-4 box in, Could also be a later box. __________________ Barry 50 F-1

12-24-2016, 07:26 AM	#3
farmerdick Senior Member Join Date: Nov 2011 Location: Readfield, Maine Posts: 349	Re: F1 Steering Box Thanks. How would I know if it was newer than 52`?

12-24-2016, 07:56 AM	#4
skidmarks Senior Member Join Date: Aug 2010 Location: newark, delaware Posts: 3,780	Re: F1 Steering Box 48 to 52 uses tapered splines with a nut on the end of the sector. 53 to 60 uses a pitman arm with a pinch bolt at the top similar to the way the king pin is held in the front axle. The 48 to 52 is the better choice in a AV8 because it gives better room around the left rear exhaust port.

12-24-2016, 09:58 AM	#5
JSeery Member Emeritus Join Date: Nov 2012 Location: Wichita KS Posts: 16,132	Re: F1 Steering Box What were talking about is F1 vs F100 steering box. They are very different in appearance, there was a recent post on the Barn that had photos of the differences. http://fordbarn.com/forum/showthread...t=steering+box Last edited by JSeery; 12-24-2016 at 10:06 AM.

12-24-2016, 11:09 AM	#6
cas3 Senior Member Join Date: Jan 2011 Location: Beverly Kansas Posts: 5,301	Re: F1 Steering Box Sponsored Links (Register now to hide all advertisements) f1-worm gear below the sector, f100 worm gear above the sector, when viewed as would be placed in the vehicle

12-24-2016, 11:15 AM	#7
farmerdick Senior Member Join Date: Nov 2011 Location: Readfield, Maine Posts: 349	Re: F1 Steering Box I believe I have a 53 to 60 box. Anyone interested in trading this box for the earlier model? Thank you again for the clarification. You guys are life savers.

12-24-2016, 11:18 AM	#8
farmerdick Senior Member Join Date: Nov 2011 Location: Readfield, Maine Posts: 349	Re: F1 Steering Box PS: Everyone Have a safe and wonderful Christmas.