Pedal Rubber pads????

[31 Model A]

If you use them, how do you keep them attached to the pedals? Just slipping them on doesn't work for me, using Gorilla glue doesn't either.

[Gary WA]

pedals worn out. mine work .no glue needed.

[Rancho Deluxe]

Get some ORIGINAL Ford ones !!..

[jm29henry]

I have never had a problem

[Mitch//pa]

Make sure your getting the lip of the rubber all the way around the back of the pedal... They usually fit pretty snug

[31 Model A]

Sponsored Links (Register now to hide all advertisements)

I'll order another pair from Snyder's tomorrow.

[DougVieyra]

Use what the Astronauts used . . . . .


Duct Tape !

[31 Model A]

Originally Posted by DougVieyra

Use what the Astronauts used . . . . .


Duct Tape !

if Sarah belonged to my neighbor, the whole car would be held together with duct tape and balling wire. His modern car is.

[Dollar Bill]

If replacements still come off try 3M weather-strip adhesive.

[msmaron]

Never had or actually heard of a problem keeping them on

[31 Model A]

Originally Posted by msmaron

Never had or actually heard of a problem keeping them on

Those pads were some of the items I changed out right off after buying Sarah. The others were well worn and in some places, through to the metal. The new ones slipped on fine and they were snug. After a few months, they started coming off, I'd put them back on and again and again. I used Gorilla glue the last time. It worked for a while.

My next pair I ordered should be here tomorrow from Snyders. We'll see!!!!

[coupe1942]

On motorcycle handle bars, some folk use hair spray and that seems to lock the rubber grips into place when new ones are installed. Not sure if it would work on those rubber pads or not, but may be worth a try.

[31 Model A]

Originally Posted by coupe1942

On motorcycle handle bars, some folk use hair spray and that seems to lock the rubber grips into place when new ones are installed. Not sure if it would work on those rubber pads or not, but may be worth a try.

New pads arrived today....will use your suggestion. Found some that the last wife forgot to take when she left.....too!!!!

[31 Model A]

Crap!!!!! Now Sarah smells like my fifth wife!!!!!!!!!!!!

[inex01]

Originally Posted by 31 Model A

If you use them, how do you keep them attached to the pedals? Just slipping them on doesn't work for me, using Gorilla glue doesn't either.

Get the Fulton pedal covers they look great and are clamped on and were an accessory when our cars were new. Have them on both my Model As and get many complements on the look of them

[31 Model A]

Originally Posted by inex01

Get the Fulton pedal covers they look great and are clamped on and were an accessory when our cars were new. Have them on both my Model As and get many complements on the look of them

Thanks for that info. If this set doesn't work out either or I get fed up driving around with the scent of my ex, I'll order these for sure.

Ed

[BILL WILLIAMSON]

Adhesives wouldn't stick to my rubber pads, until I roughed it up with 24 grit sandpaper & acetone.
Bill W.

[Nabco]

I've been looking at the Fulton covers for awhile now......so in light of the Mac's thread I have a question....Snyder's sells these for $33.50 per pair, Gaslight sells them for $27.50 per pair and Mac's sells them for $35.99 each with a low price guarantee.

Is it possible these are all manufactured by the same company with these different prices, or is Mac's just over priced?

Thanks

Nick

[31 Model A]

Originally Posted by BILL WILLIAMSON

Adhesives wouldn't stick to my rubber pads, until I roughed it up with 24 grit sandpaper & acetone.
Bill W.

DAD!!! welcome back...I did that and used Gorilla Glue, didn't work, they eventually came off.

ED (Your polite, kind and one-star bandit son!!!!!)

[31 Model A]

Originally Posted by Nabco

I've been looking at the Fulton covers for awhile now......so in light of the Mac's thread I have a question....Snyder's sells these for $33.50 per pair, Gaslight sells them for $27.50 per pair and Mac's sells them for $35.99 each with a low price guarantee.

Is it possible these are all manufactured by the same company with these different prices, or is Mac's just over priced?

Thanks

Nick

Just different places with different prices.

When I went looking to learn more I went here also:
http://lbcunited.com/earlyford2/prod...01444575e094db