The Ford Barn

wrndln · 06-14-2016, 06:22 PM

When I purchased my 29 CCPU, it had no glass or setting material in the rear window. I haven't been able to find out if there was supposed to be a rubber channel or something else around the perimeter of the glass used when installing the rear glass. According to the Service Bulletins, the glass should be 3/16" thick, not 1/4" like the door glass. I plan to use tempered glass as it is much stronger than laminated glass. If someone knows what material was originally used, please post what it was,
Rusty Nelson

Y-Blockhead · 06-14-2016, 07:24 PM

Bert's has "rear window rubber seal for all closed cars and pick ups". http://parts.modelastore.com/show_Product.asp?ID=5327

I bought some for my Town Sedan but have not installed yet.

Don't know if that's what you are looking for.

wrndln · 06-14-2016, 08:39 PM

I am pretty sure Bert's and probably other parts suppliers only carry rubber channel for 1/4" glass.
Rusty Nelson

Y-Blockhead · 06-14-2016, 09:17 PM

Sponsored Links (Register now to hide all advertisements)

I suppose your right since the glass they sell for the rear window of your PU is 1/4".

06-14-2016, 06:22 PM	#1
wrndln Senior Member Join Date: May 2010 Location: Lakeville, MN Posts: 5,297	Setting material for CCPU rear window When I purchased my 29 CCPU, it had no glass or setting material in the rear window. I haven't been able to find out if there was supposed to be a rubber channel or something else around the perimeter of the glass used when installing the rear glass. According to the Service Bulletins, the glass should be 3/16" thick, not 1/4" like the door glass. I plan to use tempered glass as it is much stronger than laminated glass. If someone knows what material was originally used, please post what it was, Rusty Nelson Last edited by wrndln; 06-14-2016 at 06:30 PM.

06-14-2016, 07:24 PM	#2
Y-Blockhead Senior Member Join Date: Jul 2011 Location: Redondo Beach, CA Posts: 6,644	Re: Setting material for CCPU rear window Bert's has "rear window rubber seal for all closed cars and pick ups". http://parts.modelastore.com/show_Product.asp?ID=5327 I bought some for my Town Sedan but have not installed yet. Don't know if that's what you are looking for. Last edited by Y-Blockhead; 06-14-2016 at 07:36 PM.

06-14-2016, 08:39 PM	#3
wrndln Senior Member Join Date: May 2010 Location: Lakeville, MN Posts: 5,297	Re: Setting material for CCPU rear window I am pretty sure Bert's and probably other parts suppliers only carry rubber channel for 1/4" glass. Rusty Nelson

06-14-2016, 09:17 PM	#4
Y-Blockhead Senior Member Join Date: Jul 2011 Location: Redondo Beach, CA Posts: 6,644	Re: Setting material for CCPU rear window Sponsored Links (Register now to hide all advertisements) I suppose your right since the glass they sell for the rear window of your PU is 1/4".