ring and pinion

[Robert Beenenga]

Hello Barners, looking for a new ring and pinion for my 1933 ford coupe, who has the best one? speedway or Mac"s or someone else selling these, looking at a 3,54 gear set ?

[VeryTangled]

Hi Everyone, Robert, I have no personal experience but many recommend vanpeltsales.

Here's a link. They show a set, B-4209-HS, at $395.

http://www.vanpeltsales.com/FH_web/r...prices-pg1.htm

[JM 35 Sedan]

Originally Posted by Robert Beenenga

Hello Barners, looking for a new ring and pinion for my 1933 ford coupe, who has the best one? speedway or Mac"s or someone else selling these, looking at a 3,54 gear set ?

Don't know if these are the best in terms of quality and cost, but they do have/sell exactly what you need, plus they have the rebuild kits that include all the bearings, gaskets, etc., that you will need to do the job.

The first url posted here would not work for some reason, but it was for the gears that The Early V-8 Sales sells, same as Bill post below. I believe most of these new repro gears are all coming from the same manufacturing source in Italy, and the folks I know who have used these gears were satisfied with them.
This url posted below will get you to their website home page, and then you would need to go from there to find their gear and gasket set offerings in their on-line catalogs.......

http://www.earlyford.com/

[34billct]

www.earlyford.com Got my set from Early Ford V8 Sales 1 800 417 3347

[JSeery]

Originally Posted by VeryTangled

Hi Everyone, Robert, I have no personal experience but many recommend vanpeltsales.

Here's a link. They show a set, B-4209-HS, at $395.

http://www.vanpeltsales.com/FH_web/r...prices-pg1.htm

Wouldn't that be 40-4209-HS and $495?

[41PICUP]

Sponsored Links (Register now to hide all advertisements)

I got 3:54s from Speedway for my 41. Getz gears made in Italy, have had no problems.