The Ford Barn

imacrazy · 12-03-2015, 07:30 PM

Is there a good spray on insulation for the doors and kick panels?
Thanks
Bill

Tom Wesenberg · 12-03-2015, 11:45 PM

3M makes a can of spray on rubberized undercoating.
Many people have used the foil insulation that is about 3/8" thick. I used that to line the whole inside of my metal Menards shelter, and it makes a big difference.

Goldhardt · 12-04-2015, 02:06 AM

Hey Tom, about how many miles per gallon do you get in that metal Menards shelter?

Tom Wesenberg · 12-04-2015, 05:19 AM

Sponsored Links (Register now to hide all advertisements)

Quote:

Originally Posted by Goldhardt

Hey Tom, about how many miles per gallon do you get in that metal Menards shelter?

I built this metal shed to house my Model A, but moved the car to the front garage and use the metal building for generator work. The insulation put an end to condensation, and also keeps the temperature much nicer.

12-03-2015, 07:30 PM	#1
imacrazy Senior Member Join Date: Mar 2011 Posts: 167	Panel Insulation Is there a good spray on insulation for the doors and kick panels? Thanks Bill

12-03-2015, 11:45 PM	#2
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Panel Insulation 3M makes a can of spray on rubberized undercoating. Many people have used the foil insulation that is about 3/8" thick. I used that to line the whole inside of my metal Menards shelter, and it makes a big difference.

12-04-2015, 02:06 AM	#3
Goldhardt Senior Member Join Date: May 2014 Location: Commercial Point, Ohio Posts: 239	Re: Panel Insulation Hey Tom, about how many miles per gallon do you get in that metal Menards shelter?