The Ford Barn

moasew · 11-24-2015, 08:27 PM

Hi:

When removing the backing plates on my early 28 tudor I noticed the grease baffles had the open part towards the backing plate as opposed to when I look at photos in the tech books and catalogues the open part is towards the drum. i.e. flat part against the backing plate. Which way is correct?

Tom Wesenberg · 11-24-2015, 08:55 PM

The open part should face the drum.

moasew · 11-25-2015, 07:21 AM

Sponsored Links (Register now to hide all advertisements)

Thanks Tom !

11-24-2015, 08:27 PM	#1
moasew Senior Member Join Date: Mar 2014 Posts: 121	Orientation of Grease Baffles? Hi: When removing the backing plates on my early 28 tudor I noticed the grease baffles had the open part towards the backing plate as opposed to when I look at photos in the tech books and catalogues the open part is towards the drum. i.e. flat part against the backing plate. Which way is correct?

11-24-2015, 08:55 PM	#2
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Orientation of Grease Baffles? The open part should face the drum.

11-25-2015, 07:21 AM	#3
moasew Senior Member Join Date: Mar 2014 Posts: 121	Re: Orientation of Grease Baffles? Sponsored Links (Register now to hide all advertisements) Thanks Tom !