|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
Join Date: Mar 2015
Location: Freetown, Massachusetts
Posts: 511
|
![]()
I have about a quart of one color and about 2 1/2 quarts of another color, in 1 gallon cans. It is PPG Concept, acrylic urethane paint. I would like to filter and pour into pint cans, hoping that it will last better. What can I use for a thinner, to slightly thin the paint, and not compromise the paint?
__________________
Brian French; 1930 Briggs Town Sedan |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Aug 2014
Posts: 438
|
![]()
I've heard that thinned paint should not be saved. I would just fill cans with least amount of air space and store in a cool place. Save the filtering for when you use the paint.
|
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: Mar 2015
Location: Freetown, Massachusetts
Posts: 511
|
![]()
Awesome, thank you.
__________________
Brian French; 1930 Briggs Town Sedan |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Jun 2015
Location: Signal Mtn, TN (SE TN)
Posts: 2,591
|
![]()
I always store paint cans up-side-down. Making sure I apped the lids down of course.
The reason.....50 years ago, a guy that trained me in body work told me to! I suppose it makes a better seal. Also, as little of air left in the can the better as already stated. |
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,972
|
![]()
Brian, thinned paint really won't hurt anything and I suspect what Harleytoprock was pointing out deals more with trying to save catalyzed paint (paint that has hardener mixed in). Fill the pint cans where there is minimal air inside, and you will be fine.
|
![]() |
![]() |
![]() |
#6 |
Senior Member
|
![]() Sponsored Links (Register now to hide all advertisements)
|
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: May 2010
Location: Oregon
Posts: 6,370
|
![]()
Even mixed catalyzed paint can be saved quite a few days in the refrigerator. A friend showed me this.
|
![]() |
![]() |
![]() |
#8 |
Senior Member
Join Date: Mar 2015
Location: Freetown, Massachusetts
Posts: 511
|
![]()
Thank you all, very much. I really appreciate the wisdom of the members.
Thank you.
__________________
Brian French; 1930 Briggs Town Sedan |
![]() |
![]() |
![]() |
#9 |
Senior Member
Join Date: May 2010
Location: Epping N.H.
Posts: 3,423
|
![]()
I was given a few dozen gallons of Dupont urethane(Imron)years ago.It was from a truck fleet that used it on their frames and axles.The insurance company told them,no more paint on the premises.They had been letting the paint work out for a few years anyway,so it was given to me.It is all dated 1977-78.I never planned to use it on anything critical,but I used some on one Model A in 1988,another in about 98,and on my roadster pickup about 8 years ago.It seems fine.I used the rest of an opened gallon on my Dodge pickup frame last week,not sure if it was one opened 25 years ago or 8 years ago.It acts like fresh paint.The activator is all from the same era,it pours out of the can kind of golden looking,that may be what it is supposed to be.I don't know if the solids separate out while sitting,I never think to put a stick in it before I shake it,but two minutes of shaking is plenty.
|
![]() |
![]() |
![]() |
#10 |
Senior Member
Join Date: May 2010
Location: Windy City
Posts: 2,919
|
![]()
Glass marbles! I was given a 12 year old quart of color in a can with plenty of wiped drips on the outside. The guy that gave it to me said to be careful pouring it. The can contained only about 1/2 paint plus marbles to take up the air space inside! When I opened it the can was full to the very top and the paint was like new. Of course, marbles were cheaper 12 years ago.
|
![]() |
![]() |
![]() |
#11 |
Senior Member
Join Date: May 2010
Location: Auburn Washington
Posts: 2,662
|
![]()
it will not harm concept to thin it. use any one of the PPG DT thinners to thin it. first thing first make sure you stir it up good so you end up with the same color later on.
|
![]() |
![]() |
![]() |
#12 |
Senior Member
Join Date: May 2010
Location: Santee, California
Posts: 3,505
|
![]()
Don't know if it's considered ok, but I save left over paint in glass quart jars. It stays fresh, and there is no worry about cans sealing. I don't trust the seal on a paint can when its been opened and closed several times.
|
![]() |
![]() |
![]() |
#13 |
Senior Member
Join Date: Jun 2014
Location: Northern Ohio
Posts: 766
|
![]()
All great tips! I will add one of my own, as far as I am concerned not letting it freeze is the most important thing other than making sure the lid is fully secure. I have many thousands of dollars worth of paint in my mixing room & I have my building set to 50 degrees at all times I am not in there.
__________________
Your QUALITY Ford Barn Transporter- Open or Enclosed. Bill's Auto Works Est. 1983 & Still Going Strong! 1955 Chevy Altered W.B. Gasser 1955 Nash Amb. Cust. Lemans 1964 Pontiac Grand Prix 2 DR HT 1966 Pontiac Catalina Conv 1966 AMC Ambassador DPL 2 DR HT 1966 AMC Ambassador Cust 2DR HT 1967 AMC Marlin 1967 Toronado 1973 Chevy Nova Full Chassis Car 1992 Jag XJS Conv 1992 Jag XJS 2 DR Coupe 2007 Cadillac XLR-V Supercharged Roadster 2008 Southern Customs Avalanche |
![]() |
![]() |
![]() |
#14 |
Senior Member
Join Date: May 2010
Location: Oregon
Posts: 6,370
|
![]()
At what temp, do you thinks the solvent will freeze? - 300 degrees?
|
![]() |
![]() |
![]() |
#15 |
Senior Member
Join Date: May 2010
Location: Camino, CA.
Posts: 3,086
|
![]()
I think that the paint will store ok in full cans, but hardener should be refrigerated.
|
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|