The Ford Barn

Divco one · 10-22-2015, 03:45 PM

Attempting to install springs on the front brake rods. I have the flat metal kind with nubs on the rods. Is there a angle bracket that is necessary mounted on the frame ? '30 coupe

RandyinUtah · 10-22-2015, 03:56 PM

Yes

Tiny · 10-22-2015, 03:59 PM

The brackets were made from the punch outs in the crossmember.

jw hash · 10-22-2015, 05:20 PM

Sponsored Links (Register now to hide all advertisements)

that angle bracket should be riveted to your frame right next to the rear bracket for the hood latch.

10-22-2015, 03:45 PM	#1
Divco one Senior Member Join Date: Jul 2013 Location: Johnstown, PA. Posts: 137	Front brake Rod spring Attempting to install springs on the front brake rods. I have the flat metal kind with nubs on the rods. Is there a angle bracket that is necessary mounted on the frame ? '30 coupe

10-22-2015, 03:56 PM	#2
RandyinUtah Senior Member Join Date: May 2010 Location: Ogden Utah Posts: 243	Re: Front brake Rod spring Yes

10-22-2015, 03:59 PM	#3
Tiny Senior Member Join Date: May 2010 Location: Redding Cal Posts: 1,388	Re: Front brake Rod spring The brackets were made from the punch outs in the crossmember. __________________ Blackwall Panthers Nor Cal chapter

10-22-2015, 05:20 PM	#4
jw hash Senior Member Join Date: May 2010 Location: Auburn Washington Posts: 2,662	Re: Front brake Rod spring Sponsored Links (Register now to hide all advertisements) that angle bracket should be riveted to your frame right next to the rear bracket for the hood latch.