The Ford Barn

exoilfld · 10-16-2015, 12:57 PM

Does anyone know it the trans on a 47 pu, open drive shaft , can be removed without taking the engine out; is there enough room? Looks like it would be close.

alan · 10-16-2015, 04:58 PM

yes you can, but be aware that it will come up thru the floor board to come out. a little hard to hold on to, remove shift handle, use a chain and a piece of heater hose 3/4", attach this to screws holding the top shift cover on the trans, this makes a really good handle

exoilfld · 10-17-2015, 07:45 AM

Sponsored Links (Register now to hide all advertisements)

Thanks. I never would have thought to make it come out that way. Thank you.

10-16-2015, 12:57 PM	#1
exoilfld Senior Member Join Date: May 2010 Location: alto, tx Posts: 154	47 trans removal Does anyone know it the trans on a 47 pu, open drive shaft , can be removed without taking the engine out; is there enough room? Looks like it would be close.

10-16-2015, 04:58 PM	#2
alan Senior Member Join Date: Jul 2010 Location: UPSTATESC Posts: 669	Re: 47 trans removal yes you can, but be aware that it will come up thru the floor board to come out. a little hard to hold on to, remove shift handle, use a chain and a piece of heater hose 3/4", attach this to screws holding the top shift cover on the trans, this makes a really good handle

10-17-2015, 07:45 AM	#3
exoilfld Senior Member Join Date: May 2010 Location: alto, tx Posts: 154	Re: 47 trans removal Sponsored Links (Register now to hide all advertisements) Thanks. I never would have thought to make it come out that way. Thank you.