The Ford Barn

RonLey · 09-22-2015, 07:56 PM

I have read the forum threads on camshafts and was set to buy a Stipe's IB330. However, they are up to 6 months out before any will be in stock. I am now to Plan B since I don't want to wait that long to get my engine back together.

The options as I see them are:
1. Send my cam into Stipe and have them do a touring grind
2. By a "B" regrind that has the .330 lift from Bratton
3. Find a Model B cam. Who has them?

Other threads have mixed reports on the touring grind. Any feedback on these options would be welcomed.

Thanks
Ron

Mitch//pa · 09-22-2015, 07:58 PM

Keep an eye on Kevin's recent post also
http://fordbarn.com/forum/showthread.php?t=178755

PC/SR · 09-22-2015, 08:00 PM

Jim Brierely, a contributor here, has many re-grind masters available for A cams, from mild to hot, if your cam is in good shape. Contact him, tell him what use you want, and he will have something to fit your needs.

RonLey · 09-22-2015, 08:00 PM

Sponsored Links (Register now to hide all advertisements)

Thanks, I missed seeing that post this evening.

09-22-2015, 07:56 PM	#1
RonLey Member Join Date: Dec 2012 Posts: 51	Need Feedback on Camshaft I have read the forum threads on camshafts and was set to buy a Stipe's IB330. However, they are up to 6 months out before any will be in stock. I am now to Plan B since I don't want to wait that long to get my engine back together. The options as I see them are: 1. Send my cam into Stipe and have them do a touring grind 2. By a "B" regrind that has the .330 lift from Bratton 3. Find a Model B cam. Who has them? Other threads have mixed reports on the touring grind. Any feedback on these options would be welcomed. Thanks Ron

09-22-2015, 07:58 PM	#2
Mitch//pa BANNED Join Date: May 2010 Location: Bucks County, PA Posts: 11,454	Re: Need Feedback on Camshaft Keep an eye on Kevin's recent post also http://fordbarn.com/forum/showthread.php?t=178755

09-22-2015, 08:00 PM	#3
PC/SR Senior Member Join Date: May 2010 Location: Santa Rosa, CA Posts: 1,285	Re: Need Feedback on Camshaft Jim Brierely, a contributor here, has many re-grind masters available for A cams, from mild to hot, if your cam is in good shape. Contact him, tell him what use you want, and he will have something to fit your needs.

09-22-2015, 08:00 PM	#4
RonLey Member Join Date: Dec 2012 Posts: 51	Re: Need Feedback on Camshaft Sponsored Links (Register now to hide all advertisements) Thanks, I missed seeing that post this evening.