The Ford Barn

UNKAS57 · 04-05-2015, 01:19 PM

I am looking for pistons Fard A small bore engine ( 3,07 inch ).
The engine nummber *AF28528*.
Pls. can somebody help me ? Thanks.

Tom Wesenberg · 04-05-2015, 01:55 PM

You might try a google search for EGGE PISTONS.
I suspect they might be tough to find. Maybe someone in England has some.

colin1928 · 04-05-2015, 05:51 PM

Try O,Neills Vintage Ford Leicestershire England
if they do not have them they know where to get them
www.oneillvintageford.co.uk

dansluck · 04-05-2015, 08:29 PM

1946 willys cj2a pistons are 3.125 bore .8118 piston pin piston 3.75 tall
Dan

Juggler · 04-06-2015, 03:19 AM

You could try Belcher Engineering in Rickinghall, England

http://www.belcherengineering.co.uk/

I know they have a few NOS head gaskets for the 14.9hp engine and I'd bet they'd have some pistons tucked away on a shelf somewhere. Colin will know.

Say hello to Goldfingers in Wenceslas Square for me

Cheers

Juggs

BILL WILLIAMSON · 04-06-2015, 07:48 AM

Sponsored Links (Register now to hide all advertisements)

Try Markus Maurer's website, he built a small bore engine & has a GREAT website on it,s build.
Bill W.

04-05-2015, 01:19 PM	#1
UNKAS57 Junior Member Join Date: Apr 2015 Location: Czech Republic Posts: 2	Pistons Ford A I am looking for pistons Fard A small bore engine ( 3,07 inch ). The engine nummber AF28528. Pls. can somebody help me ? Thanks.

04-05-2015, 01:55 PM	#2
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Pistons Ford A You might try a google search for EGGE PISTONS. I suspect they might be tough to find. Maybe someone in England has some.

04-05-2015, 05:51 PM	#3
colin1928 Senior Member Join Date: Mar 2013 Location: Australa Melbourne Posts: 878	Re: Pistons Ford A Try O,Neills Vintage Ford Leicestershire England if they do not have them they know where to get them www.oneillvintageford.co.uk

04-05-2015, 08:29 PM	#4
dansluck Senior Member Join Date: Dec 2014 Location: Nevada Posts: 242	Re: Pistons Ford A 1946 willys cj2a pistons are 3.125 bore .8118 piston pin piston 3.75 tall Dan

04-06-2015, 03:19 AM	#5
Juggler Senior Member Join Date: Aug 2010 Location: Phoenix AZ/Bath UK Posts: 483	Re: Pistons Ford A You could try Belcher Engineering in Rickinghall, England http://www.belcherengineering.co.uk/ I know they have a few NOS head gaskets for the 14.9hp engine and I'd bet they'd have some pistons tucked away on a shelf somewhere. Colin will know. Say hello to Goldfingers in Wenceslas Square for me Cheers Juggs

04-06-2015, 07:48 AM	#6
BILL WILLIAMSON Senior Member Join Date: Dec 2010 Location: FRESNO, CA Posts: 12,560	Re: Pistons Ford A Sponsored Links (Register now to hide all advertisements) Try Markus Maurer's website, he built a small bore engine & has a GREAT website on it,s build. Bill W. __________________ "THE ASSISTANT GURU OF STUFF"