The Ford Barn

wbedwards · 02-09-2015, 09:40 AM

I have a 59 Edsel 361 engine and 2 speed Mile-O-Matic auto tranny. I'm in need of a new nylon gear. Dumb question but all the web sites call for a 18 tooth gear but the one in the car that I have is 19 tooth. Go with the 19?

thanks
bedwards

Ole Don · 02-09-2015, 10:29 AM

If you think the speedo was correct, then go with the 19 tooth.

Eckler's · 02-09-2015, 10:57 AM

This is the only 19 tooth gear that i carry. Fits full size from 49-56. Hope this helps.

wbedwards · 02-09-2015, 11:34 AM

This is what mine looks like only it is stained tan-red maybe from fluid and it even has 19 stamped on it:

Eckler's · 02-09-2015, 11:57 AM

i would count the teeth again, maybe the "19" is a mold stamp of some sort. The reason i ask is i've looked around and not finding a 19 tooth anywhere for Edsel

wbedwards · 02-09-2015, 11:59 AM

Sponsored Links (Register now to hide all advertisements)

ok, will pull it out and count again dont see as good as I used to

thanks

Eckler's · 02-09-2015, 12:02 PM

This looks like it.

wbedwards · 02-09-2015, 12:54 PM

I think thats it, how many teeth?? Somehow the cable is spinning in the bottom of the gear.

bedwards

Eckler's · 02-09-2015, 12:55 PM

it's 19 tooth

wbedwards · 02-09-2015, 12:59 PM

What's your part number and I will add it to my next order I'm saving?

bedwards

Eckler's · 02-09-2015, 12:59 PM

Part #: 49-27036-1
Alt Part #: B5A-17322-CS

wbedwards · 02-09-2015, 01:01 PM

thanks

wbedwards · 02-09-2015, 01:08 PM

ok Eckler's =], help me find the heater temp and fan knobs for the same car. I bought a set for a 60 Falcon thinking they would fit and they are too small. Your sight doesn't list one for the Edsel. I think mine should use a set screw in the bottom and they are cream.

thanks again

Eckler's · 02-09-2015, 01:23 PM

Will do, let me do some looking around

Eckler's · 02-09-2015, 01:40 PM

Let me know if this is it

wbedwards · 02-09-2015, 01:48 PM

I don't have any to compare to but have this pic from another site and they look round:

wbedwards · 02-09-2015, 03:27 PM

Eckler's, can you look at these 49-30629-1 and tell me if they are made like these 49-28565-1?

bedwards

Eckler's · 02-10-2015, 07:03 AM

I had my warehouse guy check and they are they same.

wbedwards · 02-10-2015, 01:03 PM

So.... do you think I should try them for the heater knobs? I'm going to do an order by this weekend.

bedwards

Eckler's · 02-10-2015, 01:31 PM

yea try them and if it's not what your looking for just let me know and i'll take care of it.

02-09-2015, 09:40 AM	#1
wbedwards Senior Member Join Date: Jan 2015 Location: Birmingham, Al. Posts: 339	speedometer gear I have a 59 Edsel 361 engine and 2 speed Mile-O-Matic auto tranny. I'm in need of a new nylon gear. Dumb question but all the web sites call for a 18 tooth gear but the one in the car that I have is 19 tooth. Go with the 19? thanks bedwards

02-09-2015, 10:29 AM	#2
Ole Don Senior Member Join Date: May 2010 Location: St. Michael, Minnesota Posts: 1,713	Re: speedometer gear If you think the speedo was correct, then go with the 19 tooth.

02-09-2015, 10:57 AM	#3
Eckler's Senior Member Join Date: Jan 2015 Posts: 132	Re: speedometer gear This is the only 19 tooth gear that i carry. Fits full size from 49-56. Hope this helps. __________________ MACSAUTOPARTS.COM Email me direct at [email protected]

02-09-2015, 11:57 AM	#5
Eckler's Senior Member Join Date: Jan 2015 Posts: 132	Re: speedometer gear i would count the teeth again, maybe the "19" is a mold stamp of some sort. The reason i ask is i've looked around and not finding a 19 tooth anywhere for Edsel __________________ MACSAUTOPARTS.COM Email me direct at [email protected]

02-09-2015, 11:59 AM	#6
wbedwards Senior Member Join Date: Jan 2015 Location: Birmingham, Al. Posts: 339	Re: speedometer gear Sponsored Links (Register now to hide all advertisements) ok, will pull it out and count again dont see as good as I used to thanks

02-09-2015, 12:02 PM	#7
Eckler's Senior Member Join Date: Jan 2015 Posts: 132	Re: speedometer gear This looks like it. __________________ MACSAUTOPARTS.COM Email me direct at [email protected]

02-09-2015, 12:54 PM	#8
wbedwards Senior Member Join Date: Jan 2015 Location: Birmingham, Al. Posts: 339	Re: speedometer gear I think thats it, how many teeth?? Somehow the cable is spinning in the bottom of the gear. bedwards

02-09-2015, 12:55 PM	#9
Eckler's Senior Member Join Date: Jan 2015 Posts: 132	Re: speedometer gear it's 19 tooth __________________ MACSAUTOPARTS.COM Email me direct at [email protected]

02-09-2015, 12:59 PM	#10
wbedwards Senior Member Join Date: Jan 2015 Location: Birmingham, Al. Posts: 339	Re: speedometer gear What's your part number and I will add it to my next order I'm saving? bedwards

02-09-2015, 12:59 PM	#11
Eckler's Senior Member Join Date: Jan 2015 Posts: 132	Re: speedometer gear Part #: 49-27036-1 Alt Part #: B5A-17322-CS __________________ MACSAUTOPARTS.COM Email me direct at [email protected]

02-09-2015, 01:01 PM	#12
wbedwards Senior Member Join Date: Jan 2015 Location: Birmingham, Al. Posts: 339	Re: speedometer gear thanks

02-09-2015, 01:08 PM	#13
wbedwards Senior Member Join Date: Jan 2015 Location: Birmingham, Al. Posts: 339	Re: speedometer gear ok Eckler's =], help me find the heater temp and fan knobs for the same car. I bought a set for a 60 Falcon thinking they would fit and they are too small. Your sight doesn't list one for the Edsel. I think mine should use a set screw in the bottom and they are cream. thanks again

02-09-2015, 01:23 PM	#14
Eckler's Senior Member Join Date: Jan 2015 Posts: 132	Re: speedometer gear Will do, let me do some looking around __________________ MACSAUTOPARTS.COM Email me direct at [email protected]

02-09-2015, 01:40 PM	#15
Eckler's Senior Member Join Date: Jan 2015 Posts: 132	Re: speedometer gear Let me know if this is it __________________ MACSAUTOPARTS.COM Email me direct at [email protected]

02-09-2015, 03:27 PM	#17
wbedwards Senior Member Join Date: Jan 2015 Location: Birmingham, Al. Posts: 339	Re: speedometer gear Eckler's, can you look at these 49-30629-1 and tell me if they are made like these 49-28565-1? bedwards

02-10-2015, 07:03 AM	#18
Eckler's Senior Member Join Date: Jan 2015 Posts: 132	Re: speedometer gear I had my warehouse guy check and they are they same. __________________ MACSAUTOPARTS.COM Email me direct at [email protected]

02-10-2015, 01:03 PM	#19
wbedwards Senior Member Join Date: Jan 2015 Location: Birmingham, Al. Posts: 339	Re: speedometer gear So.... do you think I should try them for the heater knobs? I'm going to do an order by this weekend. bedwards

02-10-2015, 01:31 PM	#20
Eckler's Senior Member Join Date: Jan 2015 Posts: 132	Re: speedometer gear yea try them and if it's not what your looking for just let me know and i'll take care of it. __________________ MACSAUTOPARTS.COM Email me direct at [email protected]