|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
Join Date: May 2010
Location: South East NJ
Posts: 3,398
|
![]()
Just experimenting today.
I got my 1 9/16" socket in the mail today. I borrowed a 3/4" impact and set up about a 6 foot bar. The 6 foot bar did nothing. The impact did nothing with a shock sprayed with Kroil a few days ago. I heated the shock to about 400, checked with IR temp gun, and let cool till Kroil stayed wet. Let it soak for a while. Impact did not move it. Heated back up to the upper 300's (was still around 200 when I started) and resprayed when it cooled. Went back at it with the impact and it moved! Yaaaaa! The insides were exactly as I expected. Packed with rust. I have a few known bad shocks to experiment with techniques. I am trying some other ideas so we will see what I have happen. |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|