The Ford Barn

30 A Ripper · 02-10-2014, 05:09 PM

Don't want to break anything so...
Outer ring removed but remaining assembly appears stuck although it can rotate.

Thought I'd ask for suggestions.

Thanks, Dick

J Franklin · 02-10-2014, 06:11 PM

If the outer ring is screwed off it should just fall out. It might be the gasket or brass shim washer holding it.

30 A Ripper · 02-10-2014, 08:18 PM

Sponsored Links (Register now to hide all advertisements)

Thanks, it was shim and pried off with exacto blade. New float n gaskets on.

02-10-2014, 05:09 PM	#1
30 A Ripper Member Join Date: Oct 2013 Location: Lakeland Florida Posts: 68	30 gas gage removal Don't want to break anything so... Outer ring removed but remaining assembly appears stuck although it can rotate. Thought I'd ask for suggestions. Thanks, Dick

02-10-2014, 06:11 PM	#2
J Franklin Senior Member Join Date: May 2010 Location: Oregon Posts: 6,370	Re: 30 gas gage removal If the outer ring is screwed off it should just fall out. It might be the gasket or brass shim washer holding it.

02-10-2014, 08:18 PM	#3
30 A Ripper Member Join Date: Oct 2013 Location: Lakeland Florida Posts: 68	Re: 30 gas gage removal Sponsored Links (Register now to hide all advertisements) Thanks, it was shim and pried off with exacto blade. New float n gaskets on.