The Ford Barn

Rene · 09-14-2014, 05:59 AM

Hey
On my new toy for old boys a 31 Ford A pops the Light Lever / Horn Button including the shaft to Switch out. Anybody knows how it's held in place?
Thanks and regards René

Tom Wesenberg · 09-14-2014, 06:34 AM

There is a small C clip that holds the spring and spider in place on the bottom of the horn/light switch rod. You'll need to unsnap the bail wire from the switch body, then lift that out of the way. If the C clip came off be prepared for the 3 small parts to fall out when you remove the switch body. The repro C clips should be test fit to the rod before you fight with the spring and spider to hold them compressed while you install the C clip.

Bob C · 09-14-2014, 11:47 AM

Sponsored Links (Register now to hide all advertisements)

Like this.

Bob

09-14-2014, 05:59 AM	#1
Rene Junior Member Join Date: Sep 2014 Location: Switzerland Posts: 1	Light Switch/ Horn Button pops out Hey On my new toy for old boys a 31 Ford A pops the Light Lever / Horn Button including the shaft to Switch out. Anybody knows how it's held in place? Thanks and regards René

09-14-2014, 06:34 AM	#2
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Light Switch/ Horn Button pops out There is a small C clip that holds the spring and spider in place on the bottom of the horn/light switch rod. You'll need to unsnap the bail wire from the switch body, then lift that out of the way. If the C clip came off be prepared for the 3 small parts to fall out when you remove the switch body. The repro C clips should be test fit to the rod before you fight with the spring and spider to hold them compressed while you install the C clip.