The Ford Barn

timesrtuf · 07-04-2013, 08:32 AM

I need to build or buy a new front under front seat floor pan where tools were placed. I need a drawing with measurements of the slant window floor. Can anyone suggest a place to buy one or where to find a diagram of the cars floor.

Thanks

Happy 4th to all

timesrtuf

BRENT in 10-uh-C · 07-04-2013, 09:02 AM

Are you the gentleman that called me yesterday regarding the pan and the floor?

Rock Hornbuckle · 07-04-2013, 03:19 PM

Find a local A club. One of the members may have a '31 slant that you can get measurements from. Let us know where you're located, perhaps someone on this forum may be close to you and have a '31 slant.

timesrtuf · 07-04-2013, 04:52 PM

Thanks,

I'm located in Jackson, Tn. Approximately half way between Memphis and Nashville on Interstate 40.

mpalilonis · 07-05-2013, 07:43 AM

I have a '31 SW if your ever in the Philly area and want to stop by.

timesrtuf · 07-05-2013, 10:51 AM

Sponsored Links (Register now to hide all advertisements)

Thanks for the response. I probably will not be in your area anytime soon. Would there be a chance of you taking a photo of your floor pan showing the x configuration or is your seat blocking the view?

Thanks

BRENT in 10-uh-C · 07-05-2013, 11:35 AM

Bill, I will post some for you on Monday when we re-open.

timesrtuf · 07-05-2013, 12:32 PM

Thanks for the help

timesrtuf

MAG · 07-05-2013, 01:33 PM

Take a look at page A203 Snyders Catalog (2013). PN A-635-B .
Under Seat Pan- 68C Cabriolet, Slant Windshield 4dr.etc.

Kevin in NJ · 07-05-2013, 02:01 PM

The repro pan does the job. I have one in my 68C.

As I recall it needs a drain hole drilled in the bottom and the correct holes for screws or rivets drilled for attaching to the sub rails.

Charles Coe · 07-05-2013, 04:22 PM

Here's a picture:

timesrtuf · 07-05-2013, 05:28 PM

Thanks for the photo......

Timesrtuf

timesrtuf · 07-05-2013, 05:31 PM

I immediately looked at Snyder's and bingo......There it is...

Thanks for your help

Timesrtuf

timesrtuf · 07-05-2013, 05:52 PM

I really like your informative web site..

Thanks for the response.

Timesrtuf

07-04-2013, 08:32 AM	#1
timesrtuf Junior Member Join Date: Jul 2013 Posts: 11	1931 4 dr. sedan slant window I need to build or buy a new front under front seat floor pan where tools were placed. I need a drawing with measurements of the slant window floor. Can anyone suggest a place to buy one or where to find a diagram of the cars floor. Thanks Happy 4th to all timesrtuf

07-04-2013, 09:02 AM	#2
BRENT in 10-uh-C Senior Member Join Date: May 2010 Location: Eastern Tennessee Posts: 11,972	Re: 1931 4 dr. sedan slant window Are you the gentleman that called me yesterday regarding the pan and the floor? __________________ . BRENT in 10-uh-C . www.model-a-ford.com ...(...Finally Updated!! ) .

07-04-2013, 03:19 PM	#3
Rock Hornbuckle Senior Member Join Date: Mar 2011 Location: Noxon Montana Posts: 532	Re: 1931 4 dr. sedan slant window Find a local A club. One of the members may have a '31 slant that you can get measurements from. Let us know where you're located, perhaps someone on this forum may be close to you and have a '31 slant. __________________ '31 Fordor Deluxe 2W Briggs 170-B / blackwalls '41 Fordor Deluxe / 2-duece flattie '66 1/2 Dodge Charger '14 100th Anniversary Challenger Limited Edition. Semper Fidelis Last edited by Rock Hornbuckle; 07-04-2013 at 03:20 PM. Reason: typo

07-04-2013, 04:52 PM	#4
timesrtuf Junior Member Join Date: Jul 2013 Posts: 11	Re: 1931 4 dr. sedan slant window Thanks, I'm located in Jackson, Tn. Approximately half way between Memphis and Nashville on Interstate 40.

07-05-2013, 07:43 AM	#5
mpalilonis Member Join Date: Dec 2010 Location: Philadelphia, Pa Posts: 62	Re: 1931 4 dr. sedan slant window I have a '31 SW if your ever in the Philly area and want to stop by.

07-05-2013, 10:51 AM	#6
timesrtuf Junior Member Join Date: Jul 2013 Posts: 11	Re: 1931 4 dr. sedan slant window Sponsored Links (Register now to hide all advertisements) Thanks for the response. I probably will not be in your area anytime soon. Would there be a chance of you taking a photo of your floor pan showing the x configuration or is your seat blocking the view? Thanks

07-05-2013, 11:35 AM	#7
BRENT in 10-uh-C Senior Member Join Date: May 2010 Location: Eastern Tennessee Posts: 11,972	Re: 1931 4 dr. sedan slant window Bill, I will post some for you on Monday when we re-open. __________________ . BRENT in 10-uh-C . www.model-a-ford.com ...(...Finally Updated!! ) .

07-05-2013, 12:32 PM	#8
timesrtuf Junior Member Join Date: Jul 2013 Posts: 11	Re: 1931 4 dr. sedan slant window Thanks for the help timesrtuf

07-05-2013, 01:33 PM	#9
MAG Senior Member Join Date: May 2010 Location: Austin, Texas Posts: 926	Re: 1931 4 dr. sedan slant window Take a look at page A203 Snyders Catalog (2013). PN A-635-B . Under Seat Pan- 68C Cabriolet, Slant Windshield 4dr.etc. __________________ I noticed the harder I work the luckier I get!

07-05-2013, 02:01 PM	#10
Kevin in NJ Senior Member Join Date: May 2010 Location: South East NJ Posts: 3,398	Re: 1931 4 dr. sedan slant window The repro pan does the job. I have one in my 68C. As I recall it needs a drain hole drilled in the bottom and the correct holes for screws or rivets drilled for attaching to the sub rails.

07-05-2013, 05:28 PM	#12
timesrtuf Junior Member Join Date: Jul 2013 Posts: 11	Re: 1931 4 dr. sedan slant window Thanks for the photo...... Timesrtuf

07-05-2013, 05:31 PM	#13
timesrtuf Junior Member Join Date: Jul 2013 Posts: 11	Re: 1931 4 dr. sedan slant window I immediately looked at Snyder's and bingo......There it is... Thanks for your help Timesrtuf

07-05-2013, 05:52 PM	#14
timesrtuf Junior Member Join Date: Jul 2013 Posts: 11	Re: 1931 4 dr. sedan slant window I really like your informative web site.. Thanks for the response. Timesrtuf