|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Junior Member
Join Date: Mar 2013
Posts: 29
|
![]()
will a rapco 10-02065 anvil set model a rivets or what is correct tool?
|
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Oct 2012
Location: morrisburg ontario
Posts: 349
|
![]()
bbt
|
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: May 2010
Location: Lakeville, MN
Posts: 5,297
|
![]()
I have used the small red rivet tool sold by most model A parts suppliers. I think it is about $20 to $25. It works well. You clamp it in vise and use the part with the BB like end to peen over the rivets which are brass and don't take much force to set. A little oil helps make a nice rolled over end.
Rusty Nelson Last edited by wrndln; 03-28-2013 at 01:06 PM. |
![]() |
![]() |
![]() |
#4 |
Junior Member
Join Date: Mar 2013
Posts: 29
|
![]()
what is bbt?
|
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Jul 2010
Location: Cow Hampshire
Posts: 4,611
|
![]()
Means "bump to the top." Well, BTT. To bring the question back into top billing in hopes that someone will give an answer. (or a different answer.)
Joe K
__________________
Shudda kept the horse. |
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Jul 2012
Location: Indiana
Posts: 157
|
![]() Sponsored Links (Register now to hide all advertisements)
|
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: Feb 2011
Location: Cocoa, Florida
Posts: 1,609
|
![]()
Bump Back Top maybe?
![]()
__________________
Wanted: Simmons Super Power Head ![]() Craig Likon 1931 150B |
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|