|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-29-2022, 05:20 PM | #1 |
Member
Join Date: May 2016
Location: Houston TX
Posts: 79
|
Fuel gauge isn’t correct
Hey guys,
My fuel gauge has never been correct. I had the original sender in it and changed it with a new one. The new one though had the wire that goes to the gauge and to a ground (I think electrical isn’t my strong suit) I hooked up the new sender and it varies on full and half full and so on, in the morning it will say full then when I go home from work it will say half full but on the way home it will jump back to full. I disconnected the ground wire to chassis ground, to make it a one wire sender like the original, and it varies also. Any ideas on what could be going on? It’s a 53 mercury I have. Again electrical is not my strongest Thanks in advance |
01-29-2022, 05:35 PM | #2 |
Senior Member
Join Date: May 2015
Posts: 8,540
|
Re: Fuel gauge isn’t correct
Hopefully, you kept the original (King-Seeley) sending unit? The "new ones" are not compatible with the gauge in your Merc...
__________________
The only thing nice about being imperfect is the joy it brings to others.... "Silver rings, your butt! Them's washers!" "We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969 https://www.youtube.com/watch?v=7NReUd2_0u0 |
Sponsored Links (Register now to hide all advertisements) |
|
01-29-2022, 05:47 PM | #3 |
Member
Join Date: May 2016
Location: Houston TX
Posts: 79
|
Re: Fuel gauge isn’t correct
I don’t think I do have it but that one was way off also, when I had a full tank it only went to half a tank, it never went to full
|
01-29-2022, 06:12 PM | #4 |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 11,027
|
Re: Fuel gauge isn’t correct
Sponsored Links (Register now to hide all advertisements)
https://www.fordbarn.com/forum/showt...ht=king+seally |
|
|
Sponsored Links (Register now to hide all advertisements) |
|