|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-26-2014, 06:16 PM | #1 |
Junior Member
Join Date: Apr 2014
Posts: 2
|
31 deck lid handle install
I have a new handle from Sacramento Vintage Ford. My question is, do I need to cut the shaft shorter? And how tight do you tighten the nut? Any help would be great.
|
04-26-2014, 08:45 PM | #2 |
Senior Member
Join Date: May 2010
Location: Auburn Washington
Posts: 2,552
|
Re: 31 deck lid handle install
yes depending on the application you might have to cut the shafts and maybe run some threads down on the shaft. DO NOT over tighten the acorn nut there is a lock that you bend up against the nut to keep it from coming loose.
|
Sponsored Links (Register now to hide all advertisements) |
|
04-27-2014, 12:29 PM | #3 |
Junior Member
Join Date: Apr 2014
Posts: 2
|
Re: 31 deck lid handle install
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|