The Ford Barn

Tom Cavallaro · 01-28-2012, 03:41 PM

While attempting to grease my 1930 A Coupe I found I couldn't grease everything because of the different fittings. Do I need a special grease gun? Also while under the car to do some greasing I didn’t expect to find no shocks at all! The holes are in the frame where they were at one time. I have read there is a difference in the shocks as to their placement, but are the shock links all the same? Also, I have no anti rattlers left on the car…all rotted away. My question is; how many anti rattlers are needed and being more specific…longs and shorts how many of each?

01-28-2012, 03:41 PM	#1
Tom Cavallaro Senior Member Join Date: Nov 2011 Location: Barrington, NJ Posts: 280	No Shocks?? While attempting to grease my 1930 A Coupe I found I couldn't grease everything because of the different fittings. Do I need a special grease gun? Also while under the car to do some greasing I didn’t expect to find no shocks at all! The holes are in the frame where they were at one time. I have read there is a difference in the shocks as to their placement, but are the shock links all the same? Also, I have no anti rattlers left on the car…all rotted away. My question is; how many anti rattlers are needed and being more specific…longs and shorts how many of each?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode