The Ford Barn

Flat32 · 10-27-2015, 10:31 PM

I'm building a mold, head, and have need for a Ford script logo to put in the mold. I can make it from a clay impression of an existing logo if I can find an example. Logo must be raised and 1/4 to 3/8 inch long.

I assume there are many OEM parts with the logo. Doesn't matter what year. Could be plastic or die-cast, with or without the oval. Molded parts usually have a raised logo and plastic parts are more likely to have a smaller one like i need.

Help finding one will be appreciated.

Flat32

10-27-2015, 10:31 PM	#1
Flat32 Member Join Date: May 2010 Location: Federal Way, WA Posts: 95	Ford logo I'm building a mold, head, and have need for a Ford script logo to put in the mold. I can make it from a clay impression of an existing logo if I can find an example. Logo must be raised and 1/4 to 3/8 inch long. I assume there are many OEM parts with the logo. Doesn't matter what year. Could be plastic or die-cast, with or without the oval. Molded parts usually have a raised logo and plastic parts are more likely to have a smaller one like i need. Help finding one will be appreciated. Flat32

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode