Go Back   The Ford Barn > General Discussion > Model A (1928-31)
Reload this Page Spindle /king pin spacer.

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 10-26-2021, 08:05 AM   #1
48fordnut
Senior Member
 
48fordnut's Avatar
 
Join Date: Sep 2010
Location: warner robins ga 31088
Posts: 494
Default Spindle /king pin spacer.
Rebuilding a stock model A ft spindles and bushings.

There is a 3/16 to 1/4 space between the assembled spindle and the axle. It is at the bottom of the spindle. There should be a shim/washer there. I do not have one in my kit. The old parts did not have one either.

What to do?

I'm new to model a so go easy.

Thanks,

jim
48fordnut is offline   Reply With Quote
 

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Threaded Mode Threaded Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 04:31 PM.