Balancing the flywheel on the 41 pickup at home.

[Mart]

Hello! Welcome to Mart's garage. I have been struggling with a big vibration on my 41 pickup. I couldn't drive it above about 45mph it was just too harsh. It dawned on me that the Old 59 flatty in the truck had a modified flywheel. I decided to pull the motor and see if I could improve on the balance of the flywheel. In this video I show that job. I skim through the removal and refitting because I have shown that before. The setup I used was a little crude, but did yield a positive result. Although I am pleased to have made an improvement, I am not 100% happy and have yet to decide if the motor will stay.
So sit back and relax and watch me tackle a job I have not tried before. Just like normal then.
Mart.
https://youtu.be/PE2YRmar56A