The Ford Barn

deuce lover · 03-18-2019, 02:49 PM

Hopefully someone has an original to measure tip to tip .Cutting a '32 to lengthen for my '33.

34fordy · 03-18-2019, 03:18 PM

Mine is 17-3/4" or 45.084 cm

deuce lover · 03-19-2019, 03:32 PM

Thanks.The rod I have is 16 1/8",so looks like I have to add 1 5/8".I will double check before I cut and weld.

DavidG · 03-19-2019, 04:46 PM

Sheldon,

If your crank handle socket has a square opening, for a '33 passenger car the extension used (40-14070-B) was 17 1/4". The 17 3/4" version (40-14070-C) wasn't released until November, 1933 for Job #1, 1934 models.

deuce lover · 03-20-2019, 01:08 AM

Sponsored Links (Register now to hide all advertisements)

Thanks David.My handle does have the square opening.

03-18-2019, 03:18 PM	#2
34fordy Senior Member Join Date: Dec 2014 Location: Fort dodge, Iowa Posts: 1,228	Re: 33-34 hand crank bar length Mine is 17-3/4" or 45.084 cm Last edited by 34fordy; 03-18-2019 at 05:31 PM. Reason: Add cm

03-19-2019, 03:32 PM	#3
deuce lover Senior Member Join Date: May 2010 Location: Southern France Posts: 5,837	Re: 33-34 hand crank bar length Thanks.The rod I have is 16 1/8",so looks like I have to add 1 5/8".I will double check before I cut and weld.

03-19-2019, 04:46 PM	#4
DavidG Senior Member Join Date: May 2010 Location: southeastern Michigan Posts: 10,601	Re: 33-34 hand crank bar length Sheldon, If your crank handle socket has a square opening, for a '33 passenger car the extension used (40-14070-B) was 17 1/4". The 17 3/4" version (40-14070-C) wasn't released until November, 1933 for Job #1, 1934 models.

03-20-2019, 01:08 AM	#5
deuce lover Senior Member Join Date: May 2010 Location: Southern France Posts: 5,837	Re: 33-34 hand crank bar length Sponsored Links (Register now to hide all advertisements) Thanks David.My handle does have the square opening.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-18-2019, 02:49 PM	#1
deuce lover Senior Member Join Date: May 2010 Location: Southern France Posts: 5,837	33-34 hand crank bar length Hopefully someone has an original to measure tip to tip .Cutting a '32 to lengthen for my '33.