shop tip of the week

[cas3]

i have been tearing down several rear axles of late, and i thought you guys may like the the part i use for pressing the pinion out of the case. its the piece of a 34 axle housing i cut for mating a late columbia to a 34 housing. its tapered, so the big end fits nicely around the pinion bearings, and the small end meets my press without having to center it or find another adapter. so, not too exciting, but this thread could continue, like 19fourdy's caulk gun trick, list em here!

[34fivewindow]

Originally Posted by cas3

i have been tearing down several rear axles of late, and i thought you guys may like the the part i use for pressing the pinion out of the case. its the piece of a 34 axle housing i cut for mating a late columbia to a 34 housing. its tapered, so the big end fits nicely around the pinion bearings, and the small end meets my press without having to center it or find another adapter. so, not too exciting, but this thread could continue, like 19fourdy's caulk gun trick, list em here!

Now thats pretty slick! Thanks for the picture.

[19Fordy]

Sponsored Links (Register now to hide all advertisements)

How much pressure is required. Neat idea.