wiring harness frame clips

[larry harding]

when i was wiring my pickup i ordered the frame clips from mikes, they seem to be made from thin gage sheet metal with little springiness to them. yesterday i was helping a friend run some wiring on his "a" and the clips he had seemed to be good spring steel. i had to really pry on them with a screwdriver to slide them off the frame rail. if i had done that with the clips i have they would have just bent and stayed bent. does any of the suppliers have good spring steel clips clips?

[BW]

Try Restoration Specialties & Supply , INC. 814-467-9842 www.restorationspecialties.com

[lindy williams]

the ones I bought from Bratton's have plenty of "springiness".

[captndan]

Spring over to Bert's.

[SeaSlugs]

Originally Posted by larry harding

when i was wiring my pickup i ordered the frame clips from mikes, they seem to be made from thin gage sheet metal with little springiness to them. yesterday i was helping a friend run some wiring on his "a" and the clips he had seemed to be good spring steel. i had to really pry on them with a screwdriver to slide them off the frame rail. if i had done that with the clips i have they would have just bent and stayed bent. does any of the suppliers have good spring steel clips clips?

Mikes is pretty on the ball - I would give them a call and see if they are aware they may have gotten a bad batch and are unaware of it...

[larry harding]

Sponsored Links (Register now to hide all advertisements)

thanks guys!