|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
12-04-2016, 09:08 PM | #1 |
Senior Member
Join Date: May 2010
Location: Boulder, CO
Posts: 559
|
Front Fender Bracket - June 1931 and after
I am looking for pictures of the front fender bracket which was used starting June 1931. It has the channel extended to the bottom of the bracket and required a longer bolt.
FYI - Pictures are to be used in an article I am writing. So, they would get published.
__________________
[email protected] - email contact https://aafords.com Ford Model AA Truck Club @ aafords.com Last edited by Neil Wilson; 12-06-2016 at 01:02 PM. |
12-06-2016, 01:04 PM | #2 |
Senior Member
Join Date: May 2010
Location: Boulder, CO
Posts: 559
|
Re: Front Fender Bracket - June 1931 and after
Pictures would be great please.
__________________
[email protected] - email contact https://aafords.com Ford Model AA Truck Club @ aafords.com |
Sponsored Links (Register now to hide all advertisements) |
|
12-06-2016, 02:14 PM | #3 |
BANNED
Join Date: May 2010
Location: Walla Walla, Washington USA
Posts: 6,066
|
Re: Front Fender Bracket - June 1931 and after
Is there anyone out there in Model A land that can help Mr. Wilson?
Thanks. Pluck |
12-06-2016, 06:31 PM | #4 |
Senior Member
Join Date: Mar 2012
Location: Lakewood, Colorado
Posts: 158
|
Re: Front Fender Bracket - June 1931 and after
Hi Neil,
Saw your post on the AA forum and figured you were looking for the ones for AA Fords. If you need photos of the brackets for Model A's (same for AA's ??) then I have the ones from my 1931 Deluxe Tudor, frame number A4515098. They are the ones on the left in the photo. The ones on the right are a couple that I purchased at two different swap meets. The tops are very different among the four. The ones from my car match pretty well. The other two have different tops. Different manufactures ? Ray |
12-06-2016, 07:04 PM | #5 |
Senior Member
Join Date: Apr 2011
Location: Milpitas, CA
Posts: 406
|
Re: Front Fender Bracket - June 1931 and after
Neil
I have the late 31 AA brackets with the reinforcing piece by the frame. I can take pictures if you need them. Bill
__________________
Bill Cilker, Jr Unrestored 190A Victoria 45B, 160B & 189A Victoria Association President |
12-06-2016, 09:02 PM | #6 |
Senior Member
Join Date: May 2010
Location: Boulder, CO
Posts: 559
|
Re: Front Fender Bracket - June 1931 and after
Sponsored Links (Register now to hide all advertisements)
__________________
[email protected] - email contact https://aafords.com Ford Model AA Truck Club @ aafords.com |
12-06-2016, 09:06 PM | #7 |
Senior Member
Join Date: May 2010
Location: Boulder, CO
Posts: 559
|
Re: Front Fender Bracket - June 1931 and after
Quote:
__________________
[email protected] - email contact https://aafords.com Ford Model AA Truck Club @ aafords.com |
12-06-2016, 09:24 PM | #8 |
Senior Member
Join Date: Mar 2012
Location: Lakewood, Colorado
Posts: 158
|
Re: Front Fender Bracket - June 1931 and after
|
12-06-2016, 10:08 PM | #9 |
Senior Member
Join Date: May 2010
Location: Boulder, CO
Posts: 559
|
Re: Front Fender Bracket - June 1931 and after
Ray, More great shots. And no reinforcement at the fender. Attached is the bracket with a reinforcement. Does anyone have another shot showing the reinforcement?
__________________
[email protected] - email contact https://aafords.com Ford Model AA Truck Club @ aafords.com |
12-07-2016, 01:59 PM | #10 |
Senior Member
Join Date: Apr 2011
Location: Milpitas, CA
Posts: 406
|
Re: Front Fender Bracket - June 1931 and after
Neil
I will get you a picture tomorrow Bill
__________________
Bill Cilker, Jr Unrestored 190A Victoria 45B, 160B & 189A Victoria Association President |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|